R
An Extensive Selection of Fiber-Optic Cables
Fiber-Optic Sensing Heads Offer a
Wide Variety of Unique Solutions for
Tough Problems
H Fiber-optic sensors detect small,
H
H
H
H
H
H
H
H
fast-moving objects in space-confined
installations and harsh environments
For a custom fit in the field, most plastic
filament cables can be cut to length
For detection in hard-to-reach places,
sensing heads with bendable stainless steel
tubing retain complex shapes
Coiled and ultra-flexible cables are ideal for
flexing and reciprocating machinery such as
robots
Side-view sensing heads or accessories
save space in right-angle detection
Convergent beam sensing heads allow
accurate positioning and background
suppression even for shiny objects
Narrow detection zone of concentric beam
sensing heads helps eliminate background
objects and gives consistent sensing,
regardless of object direction
Highly flexible fibers with minimum 1-mm
bending radius allows cable to conform to
machine contours
Most fiber cables offer IP67 protection and
temperature ratings of --40°C to 70°C
(--40°F to 158°F)
2
E32
E32
E32
J FIBER-OPTIC CABLE AND AMPLIFIER COMPATIBILITY
Fiber cables
DIN-rail mounting amplifiers
Part number
E3X-A
E3X-DAN
Block style amplifiers
E3X-F
E3X-H,
-NH
E3X-NM
E3X-NT,
-NV
E3XNVG,-VG
E3MCMY
E3XACC4A
E3JU-XR
E3JU-X
E3A2-X
E3S-X3
Through - beam, General Purpose Type
E32-T11
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-T11L
OK
OK
OK
OK
OK
OK
OK
OK
----
----
----
E32-T11R
OK
OK
----
OK
OK
OK
----
----
----
----
----
E32-T12L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-T17L
OK
OK
OK
OK
OK
OK
OK
OK
----
----
----
E32-T21
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-T21L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-T21R
OK
OK
----
OK
OK
OK
----
----
----
----
----
E32-T22
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-T22L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-TC50
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
E32-TC200
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK (-XR)
OK
E32-TC200A
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-TC200C
OK
----
OK
OK
OK
OK
OK
----
----
----
OK
E32-TC200E
OK
OK
OK
OK
OK
OK
OK
----
OK
--
OK
E32-TC500
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
E32-TC1000
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
Through -beam, Armored Type
E32-UTAT13F
OK
----
----
----
----
----
----
----
----
OK (-XR)
----
E32-UTAT16F
OK
----
----
----
----
----
----
----
----
OK (-XR)
----
E32-UTBT13F
----
----
----
----
----
----
----
----
----
OK (-X)
----
E32-UTBT16F
----
----
----
----
----
----
----
----
----
OK (-X)
----
Though -beam, Probe Type
E32-T33-1
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
E32-TC200B
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-TC200B4
OK
OK
OK
OK
OK
OK
OK
----
OK
----
----
E32-TC200D
OK
----
OK
OK
----
----
OK (-VG)
----
----
----
OK
E32-TC200D4
OK
----
OK
OK
----
----
OK (-VG)
----
----
----
----
E32-TC200F
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-TC200F4
OK
OK
OK
OK
OK
OK
OK
----
OK
----
----
Through -beam, Side Sensing Type
E32-T14
OK
OK
OK
OK
OK
OK
OK
----
OK
----
----
E32-T14L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-T16
OK
OK
OK
OK
OK
OK
OK
OK
OK
----
----
E32-T16P
OK
OK
----
OK (-NH)
OK
OK
----
----
OK
----
----
E32-T24
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
Through -beam, High Temperature Type
E32-T51
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-T61
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
Through -beam, Special Purpose Type
E32-G14
OK
OK
OK
OK
OK
OK
OK
----
OK
----
----
E32-M21
OK
OK
OK
OK
OK
OK
OK
----
OK
----
----
E32-T12F
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-T22S
----
OK
----
OK
OK
OK
----
----
----
----
----
E32-T24S
----
OK
----
OK
OK
OK
----
----
----
----
----
E32-T84S
----
OK
----
OK (-NH)
OK
OK
----
----
----
----
----
3
E32
E32
Fiber cables
DIN-rail mounting amplifiers
Part number
E3X-A
E3X-DAN
Block style amplifiers
E3X-F
E3X-H,
-NH
E3X-NM
E3X-NT,
-NV
E3XNVG,-VG
E3MCMY
E3XACC4A
E3JU-XR
E3JU-X
E3A2-X
E3S-X3
Diffuse, General Purpose Type
E32-CC200
OK
OK
OK
OK
OK
OK
OK
OK
OK
----
OK
E32-D11
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-D11L
OK
OK
OK
OK
OK
OK
OK
OK
----
----
----
E32-D11R
OK
OK
----
OK (-NH)
OK
OK
OK
----
----
----
----
E32-D21
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-D21L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-D21R
OK
OK
----
OK (-NH)
OK
OK
----
----
----
----
----
E32-D22L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-D32
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-D32L
OK
OK
OK
OK
OK
OK
OK
OK
----
----
----
E32-DC50
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
E32-DC200
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK (-XR)
OK
E32-DC200C
OK
----
OK
OK
OK
OK
OK
----
----
----
OK
E32-DC200E
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-DC500
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
E32-DC1000
OK
----
OK
OK (-H)
----
----
OK (-VG)
----
----
----
----
Diffuse, Armored Type
E32-UDAT13F
OK
----
----
----
----
----
----
----
----
OK (-XR)
----
E32-UDAT16F
OK
----
----
----
----
----
----
----
----
OK (-XR)
----
E32-UDBT13F
----
----
----
----
----
----
----
----
----
OK (-X)
----
E32-UDBT16F
----
----
----
----
----
----
----
----
----
OK (-X)
----
Diffuse, Probe Type
E32-D33
OK
OK
OK
OK
OK
OK
----
----
OK
----
----
E32-DC200B
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-DC200B4
OK
OK
OK
OK
OK
OK
OK
----
----
----
OK
E32-DC200D
OK
----
OK
OK
----
----
OK (-VG)
----
----
----
OK
E32-DC200D4
OK
----
OK
OK
----
----
OK (-VG)
----
----
----
----
E32-DC200F
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-DC200F4
OK
OK
OK
OK
OK
OK
OK
----
OK
----
OK
E32-DC9G
OK
----
OK
OK
----
----
OK (-VG)
----
OK
----
----
E32-DC9G4
OK
----
OK
OK
----
----
OK (-VG)
----
----
----
----
Diffuse, Side Sensing Type
E32-D14L
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-D24
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
Diffuse, High Temperature Type
E32-D51
OK
OK
OK
OK
OK
OK
OK
----
----
OK (-XR)
----
E32-D61
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-D73
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
Diffuse, Convergent and Special Purpose Types
E32-D12F
OK
OK
OK
OK
OK
OK
OK
----
----
----
----
E32-L24L
OK
OK
OK
OK
OK
OK
----
----
----
----
----
E32-L25
OK
OK
OK
OK
OK
OK
----
----
----
----
----
E32-L25A
OK
OK
OK
OK
OK
OK
----
----
----
----
----
E32-L25L
OK
OK
OK
OK
OK
OK
----
----
----
----
----
Retroreflective Type
E32-R16
OK
OK
OK
OK
OK
OK
----
----
----
----
----
E32-R21
OK
OK
OK
OK
OK
OK
----
----
OK
----
----
4
E32
E32
Ordering Information
Omron offers fiber-optic cables in through-beam, diffuse and
retroreflective types. Each cable has a different sensing distance
depending on the amplifier selected. The ordering information
provides the sensing distance and compatibility with two general
classes of amplifiers: DIN rail-mounting DC amplifiers and block
style amplifiers with different attributes, such as AC/DC supply
voltage, analog output and color sensing.
indicates models that customers can cut to length for their
application. Models without this mark are pre-cut by the factory to
maintain their respective specifications.
J E3X-SERIES, DIN RAIL-MOUNTING AMPLIFIERS
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
J THROUGH-BEAM, GENERAL PURPOSE TYPE
Application Features
Appearance
Flexible,
resists
breaking
M4 threaded head
DAN-HS
x 11.7
11 7 mm (0.46
(0 46 in) L
Ideal for mounting
on moving sections
4 mm bending radius
2 m (6.56
(6 56 ft) length
Long
g
di t
distance
Compact
p
M4,, head,,
1 4 mm ID fiber;
1.4
fib
25 mm bending
radius
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
180 (1,000*) mm
0.2 mm dia.
E32-T11
250 (1,300*) mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
850 (4,000**) mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
680 (3,600*) mm
0.01 mm dia.
F
80 (400*) mm
0.2 mm dia.
H
360 (2,000*) mm
0.3 mm dia.
NH
360 (2,000*) mm
0.04 mm dia.
NHB
50 mm
0.04 mm dia.
NM
240 (1,300*) mm
0.2 mm dia.
NT
260 (1,400*) mm
0.1 mm dia.
NV
260 (1,400*) mm
0.1 mm dia.
NVG
10 (120*) mm
0.2 mm dia.
VG
10 (120*) mm
0.2 mm dia.
A
350 (1,000*) mm
0.5 mm dia.
M4 threaded head x DAN-HS
11 mm (0.43 in) L
DAN-LD
490 (1,200*) mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
1,660 (4,000**) mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
1,330 (3,200*) mm
0.02 mm dia.
F
150 (550*) mm
0.5 mm dia.
H
700 (2,000*) mm
0.5 mm dia.
NH
700 (2,000*) mm
0.06 mm dia.
NHB
90 (250*) mm
0.06 mm dia.
NM
500 (1,200 *) mm
0.2 mm dia.
NT
540 (1,280*) mm
0.15 mm dia.
NV
540 (1,280*) mm
0.15 mm dia.
NVG
40 (120*) mm
0.5 mm dia.
VG
40 (120*) mm
0.5 mm dia.
E32-T11L
E32
T11L
Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
** Value in parentheses is based on each fiber having a cable length of 2 m.
5
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Flexible
(resists
breaking)
Can be bent like
electric wires; 1 mm
bending radius
Appearance
M4 screw x
14 mm (0.55
(0 55 in)
2 m (6.56
(6 56 ft) llength
th
Long
g
di t
distance
Compact
p
unthreaded
h d 1 mm ID fiber
head;
fib
Type
Detection distance
Min. detectable object (opaque)
Part number
A
140 (1,000*)
0.2 mm dia.
E32
T11R
E32-T11R
DAN-HS
200 (1,400*) mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
670 (4,000**) mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
530 (3,700*) mm
0.01 mm dia.
F
Contact Omron
Contact Omron
H
280 (2,100*)
Contact Omron
NH
280 mm (2,100*)
0.1 mm dia.
NHB
Contact Omron
Contact Omron
NM
180 (1,300*) mm
0.2 mm dia.
NT
200 (1,400*) mm
0.1 mm dia.
NV
200 (1,400*) mm
0.1 mm dia.
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
A
350 mm
0.5 mm dia.
490 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
1,660 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
1,330 mm
0.01 mm dia.
F
150 mm
0.5 mm dia.
H
700 mm
0.5 mm dia.
NH
700 mm
0.06 mm dia.
NHB
90 mm
0.06 mm dia.
NM
500 mm
0.2 mm dia.
NT
540 mm
0.15 mm dia.
NV
540 mm
0.15 mm dia.
NVG
40 mm
0.5 mm dia.
VG
40 mm
0.5 mm dia.
3 mm dia. (0.12 in) x DAN-HS
14 mm (0.55
(0 55 in)
i )
2 m (6.56
(
ft)
f ) length
l
h
Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
** Value in parentheses is based on each fiber having a cable length of 2 m.
6
E32-T12L
E32
T12L
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Long
distance
Flexible
( i t
(resists
breaking)
Magnifying lens
extends sensing
distance; ideal for
explosion-proof
p
p
applications;
li i
25
2 mm
bending radius; M14
head,, 1 mm ID fiber
Ideal for mounting
g
on moving
i sections;
ti
4 mm bending
radius; 0.5 mm ID
fib
fiber
Appearance
Type
Detection distance
Min. detectable object (opaque)
Part number
A
7,000 mm
0.8 mm dia.
E32-T17L
DAN-HS
9,800 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
20,000 mm *
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
20,000 mm *
0.01 mm dia.
F
3,000 mm
1.5 mm dia.
H
14,000 mm
2.1 mm dia.
NH
14,000 mm
0.2 mm dia.
NHB
2,000 mm
0.2 mm dia.
NM
7,000 mm
0.7 mm dia.
NT
7,500 mm
0.5 mm dia.
NV
7,500 mm
0.5 mm dia.
NVG
800 mm
2.1 mm dia.
VG
800 mm
2.1 mm dia.
A
50 mm
0.2 mm dia.
M3 threaded head x
11 mm (0.43 in) L
DAN-HS
80 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-LD
220 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
200 mm
0.01 mm dia.
F
26 mm
0.2 mm dia.
H
100 mm
0.2 mm dia.
NH
100 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
65 mm
0.2 mm dia.
NT
70 mm
0.1 mm dia.
NV
70 mm
0.1 mm dia.
NVG
6 mm
0.1 mm dia.
VG
6 mm
0.2 mm dia.
M14 threaded head
x 23 mm (0.91
(0 91 in)
i )L
10 m (32.8
(
ft)
f ) length
l
h
Note: * Value is based on each fiber having a cable length of 10 m.
7
E32-T21
E32
T21
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Long
distance
Flexible
( i t
(resists
breaking)
Compact mounting
head; 25 mm
bending radius;
0.5 mm ID fiber
Can be bent like
electric
l t i wires;
i
1 mm
bending radius
Appearance
M3 threaded head x
9 mm (0.35
(0 35 in) L
2 m (6.56
(6 56 ft) length
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
100 mm
0.2 mm dia.
E32
T21L
E32-T21L
DAN-HS
180 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
500 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
440 mm
0.01 mm dia.
F
50 mm
0.2 mm dia.
H
200 mm
0.2 mm dia.
NH
200 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
150 mm
0.2 mm dia.
NT
160 mm
0.1 mm dia.
NV
160 mm
0.1 mm dia.
NVG
10 mm
0.2 mm dia.
VG
10 mm
0.2 mm dia.
A
30 mm
0.2 mm dia.
50 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
150 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
130 mm
0.01 mm dia.
F
Contact Omron
Contact Omron
H
60 mm
0.2 mm dia.
NH
60 mm
0.1 mm dia.
NHB
Contact Omron
Contact Omron
NM
40 mm
0.2 mm dia.
NT
41 mm
0.1 mm dia.
NV
41 mm
0.1 mm dia.
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
M3 threaded head x DAN-HS
9 5 mm (0.37
9.5
(0 37 in) L
2 m (6.56
(6 56 ft) length
8
E32-T21R
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Minute
objects
Long
g
di t
distance
2 mm dia. head fits
in space-confined
areas; 25 mm
bending
g radius;;
0 mm ID fiber
0.5
fib
2 mm dia. head fits
i space-confined
in
fi d
areas; 25 mm
bending
g radius;
0 5 mm ID fiber
0.5
fib
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
50 mm
0.1 mm dia.
E32
T22
E32-T22
DAN-HS
90 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
250 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
220 mm
0.01 mm dia.
F
26 mm
0.1 mm dia.
H
100 mm
0.1 mm dia.
NH
100 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
70 mm
0.2 mm dia.
NT
75 mm
0.1 mm dia.
NV
75 mm
0.1 mm dia.
NVG
7 mm
0.1 mm dia.
VG
7 mm
0.1 mm dia.
A
100 mm
0.2 mm dia.
2 mm dia. (0.8 in) x DAN-HS
180 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
500 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
440 mm
0.01 mm dia.
F
50 mm
0.2 mm dia.
H
200 mm
0.2 mm dia.
NH
200 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
150 mm
0.2 mm dia.
NT
160 mm
0.1 mm dia.
NV
160 mm
0.1 mm dia.
NVG
10 mm
0.2 mm dia.
VG
10 mm
0.2 mm dia.
2 mm dia. (0.8 in) x
22 mm (0.87
(0 87 in)
i )
2 m (6.56
(6 56 ft) length
l
th
22 mm (0.87
(0 87 in)
i )
2 m (6.56
(
ft)
f ) length
l
h
9
E32-T22L
E32
T22L
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
General
purpose
Compact threaded
head; short cable
length; 25 mm
bending
g radius;;
1 mm ID fiber
fib
Compact
p
threaded
h d 25 mm
head;
bending radius;
1 mm ID fiber
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
200 (1,500*) mm
0.2 mm dia.
E32-TC50
M4 threaded head x
14 mm (0.55 in) L
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
50 cm (1.64 ft) length
DAN-SM
Contact Omron
Contact Omron
F
80 mm
0.2 mm dia.
H
400 (3,000*) mm
0.2 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
28 mm (190*) mm
0.2 mm dia.
A
200 (1,500*) mm
0.2 mm dia.
DAN-HS
280 (2,100*) mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
950 (4,000**) mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
760 (4,000**) mm
0.01 mm dia.
F
80 (670*) mm
0.2 mm dia.
H
400 (3,000*) mm
0.2 mm dia.
NH
400 (3,000*) mm
0.04 mm dia.
NHB
55 (420*) mm
0.04 mm dia.
NM
270 (2,000*) mm
0.2 mm dia.
NT
290 (2,100*) mm
0.1 mm dia.
NV
290 (2,100*) mm
0.1 mm dia.
NVG
28 mm (190*) mm
0.2 mm dia.
VG
28 mm (190*) mm
0.2 mm dia.
M4 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
** Value in parentheses is based on each fiber having a cable length of 2 m.
10
E32-TC200
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
General
purpose
Appearance
M3; possible to
mount the reflective
side-view conversion M3 threaded head x
7 mm (0.28
(
in)
i )L
attachment
(E39 F ) 25
(E39-F5);
2 mm
2 m (6.56 ft) length
bending radius;
1 mm ID fiber
Spiral
p
coiled cable
withstands
ith t d repeated
t d
stretching from
reciprocating
p
g
machine
hi parts;
t
25 mm bending
radius; 1 mm ID fiber
M4 threaded
M
h
d d head
h dx
11 mm (0.43 in) L
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
180 mm
0.2 mm dia.
E32-TC200A
DAN-HS
250 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
850 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
680 mm
0.01 mm dia.
F
80 mm
0.2 mm dia.
H
360 mm
0.3 mm dia.
NH
360 mm
0.04 mm dia.
NHB
55 mm
0.04 mm dia.
NM
250 mm
0.2 mm dia.
NT
270 mm
0.1 mm dia.
NV
270 mm
0.1 mm dia.
NVG
28 mm
0.2 mm dia.
VG
28 mm
0.2 mm dia.
A
150 (800*) mm
0.2 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
60 (350*) mm
0.2 mm dia.
H
300 (1,600*) mm
0.2 mm dia.
NH
300 (3,600*) mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
200 (800*) mm
0.2 mm dia
NT
210 (850*) mm
0.1 mm dia
NV
210 (850*) mm
0.1 mm dia
NVG
18 (100*) mm
0.2 mm dia
VG
18 (100*) mm
0.2 mm dia
Coiled 56.5 cm (1.8
ft) L; 2 m (6.56 ft) exF
tended
Note: *Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
11
E32-TC200C
E32
TC200C
E32
E32
J THROUGH-BEAM, GENERAL PURPOSE TYPE
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
General
purpose
General
purpose
M3; suitable for
detecting minute
objects; 25 mm
bending
g radius;;
0 5 mm ID fiber
0.5
fib
Extended length
g and
sensing
i distance;
di t
25 mm bending
radius; 1 mm ID fiber
Extended length
g and
sensing
i distance;
di t
25 mm bending
radius; 1 mm ID fiber
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
50 mm
0.1mm dia.
E32
TC200E
E32-TC200E
DAN-HS
90 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
250 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
220 mm
0.01 mm dia.
F
26 mm
0.1 mm dia.
H
100 mm
0.1 mm dia.
NH
100 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
70 mm
0.2 mm dia.
NT
75 mm
0.1 mm dia.
NV
75 mm
0.1 mm dia.
NVG
8 mm
0.1 mm dia.
VG
8 mm
0.1 mm dia.
A
200 (1,500*) mm
0.2 mm dia.
M4 threaded head x
14 mm (0.55 in) L
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
5 m (16.4 ft) length
DAN-SM
Contact Omron
Contact Omron
F
80 mm
0.2 mm dia.
H
400 (3,000*) mm
0.2 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
28 mm
0.2 mm dia.
A
500 (1000*) mm
0.01 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
500(1,000*) mm
0.01 mm dia.
H
500 (1,000*) mm
0.01 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
500 (1,000*) mm
0.01 mm dia.
M3 threaded head x
11 mm (0.43
(0 43 in) L
2 m (6.56
(6 56 ft) length
M4 threaded head x
14 mm (0.55
(
in)
i )L
10 m (32.8 ft) length
Note: *Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
12
E32-TC500
E32-TC1000
E32
E32
J THROUGH-BEAM, ARMORED TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
200 mm
0.2 mm dia.
E32
UTAT1 3F
E32-UTAT1-3F
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
A
170 mm
0.2 mm dia.
DAN-HS
Contact Omron
Contact Omron
5/16 -- 24 thread x
3.8 mm (1.5 in) L
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
1.83 m (6 ft) length
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
E3JU-X
amp only
400 mm
0.25 mm dia.
E32-UTBT1-3F
E3JU-X
amp only
400 mm
0.25 mm dia.
E32-UTBT1-6F
Can withstand temtem peratures to 150°C
(302°F)
5/16 -- 24 thread x
3 8 mm (1.5
3.8
(1 5 in)
i )L
0.91 m (3
( ft)
f ) length
l
h
General
purpose
Can withstand tem-peratures
t
to
t 150°C
(302°F)
General
purpose
Can withstand temperatures to 200°C
(392°F)
General
purpose
Can withstand temperatures to 200°C
(392°F)
5/16-- 24 thread x
38.1 mm (1.5 in) L
E32-UTAT1-6F
0.91 m (3 ft) length
5/16-- 24 thread x
38.1 mm (1.5 in) L
1.83 m (6 ft) length
13
E32
E32
J THROUGH-BEAM, PROBE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Needle
probe
Thin fiber
303 stainless steel
probe for ultra small
objects; 12 mm heat
shrink tubing
g can
provide
id extra sealing
li
and strain relief;
25 mm bending
g
radius;
di
0.25
0 25 mm ID
fiber
Probe for spacep
confined
fi d sensing
i
areas; 25 mm
bending
g radius;
1 mm ID fiber.
fib
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
15 mm
0.06 mm dia.
E32-T33-1
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
15 mm
0.06 mm dia.
H
15 mm
0.06 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
15 mm
0.06 mm dia.
A
180 mm
0.2 mm dia.
M4 threaded head
90 mm (3.54
(3 54 in)
probe length
DAN-HS
280 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
950 mm
-- -- -- -- -- -- -- -- -- -- -- --
(
g
2 m (6.56
ft)) length
DAN-SM
760 mm
0.01 mm dia.
F
80 mm
0.2 mm dia.
H
400 mm
0.2 mm dia.
NH
400 mm
0.04 mm dia.
NHB
55mm
0.04 mm dia.
NM
270 mm
0.2 mm dia.
NT
290 mm
0.1 mm dia.
NV
290 mm
0.1 mm dia.
NVG
28 mm
0.2 mm dia.
VG
28 mm
0.2 mm dia.
0.8 mm dia. A
x 15 mm L
3 mm dia. x
20 mm L
2 m (6.56
(6 56 ft) cable
14
E32-TC200B
E32
TC200B
E32
E32
J THROUGH-BEAM, PROBE TYPE (CONT.)
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Thin fiber
Thin probe
p
Thin probe
p
Probe for spacespace
confined sensing
areas; 25 mm
bending
g radius;;
1 mm ID fiber
fib
Sensing
g head with
90 mm probe;
b spiral
i l
coiled cable withstands repeated
p
stretching
t t hi from
f
reciprocating
machine parts;
p
25 mm bending
radius; 1 mm ID fiber
Sensing
g head with
40 mm probe;
b spiral
i l
coiled cable
withstands repeated
p
stretching
t t hi from
f
reciprocating
machine parts;
25 mm bending
radius; 1 mm ID fiber
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
180 mm
0.2 mm dia.
E32-TC200B4
M4 threaded head
40 mm (1.57
(1 57 in)
probe length
DAN-HS
280 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
950 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
760 mm
0.01 mm dia.
F
80 mm
0.2 mm dia.
H
400 mm
0.2 mm dia.
NH
400 mm
0.04 mm dia.
NHB
55 mm
0.04 mm dia.
NM
270 mm
0.2 mm dia.
NT
290 mm
0.1 mm dia.
NV
290 mm
0.1 mm dia.
NVG
28 mm
0.2 mm dia.
VG
28 mm
0.2 mm dia.
A
150 mm
0.2 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
60 mm
0.2 mm dia.
H
300 mm
0.2 mm dia.
NH
300 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
18 mm
0.2 mm dia.
A
150 mm
0.2 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
60 mm
0.2 mm dia.
H
300 mm
0.2 mm dia.
NH
300 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
18 mm
0.2 mm dia.
M4 threaded head
90 mm (3.54 in)
probe length
Coiled 56.6
56 6 cm
((1.85 ft);
);
2 m (6.56
(6 56 ft) when
extended
M4 threaded head
40 mm (1.57
(
in))
probe length
Coiled 56.6
56 6 cm
(1.85 ft);
2 m (6.56
(6 56 ft) when
h
extended
15
E32-TC200D
E32
TC200D
E32-TC200D4
E32
TC200D4
E32
E32
J THROUGH BEAM, PROBE TYPE (CONT.)
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Thin probe
Thin probe
p
Sensing head with
90 mm probe; 25
mm bending radius;
0.5 mm ID fiber
Sensing
g head with
40 mm probe;
b
25 mm bending
radius; 0.5 mm ID
fib
fiber
Appearance
Type
Detection distance
Min. detectable
object (opaque)
A
50 mm
0.1 mm dia.
M3 threaded head
90 mm (3.54
(3 54 in)
length
g probe
p
DAN-HS
90 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
250 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
220 mm
0.01 mm dia.
F
26 mm
0.1 mm dia.
H
100 mm
0.1 mm dia.
NH
100 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
70 mm
0.2 mm dia.
NT
75 mm
0.1 mm dia.
NV
75 mm
0.1 mm dia.
NVG
8 mm
0.1 mm dia.
VG
8 mm
0.1 mm dia.
A
50 mm
0.1 mm dia.
M3 threaded head
40 mm (1.57
(1 57 in)
length
g probe
p
DAN-HS
90 mm
-- -- -- -- -- -- -- -- -- -- --
DAN-LD
250 mm
-- -- -- -- -- -- -- -- -- -- --
(
g
2m (6.56
ft)) length
DAN-SM
220 mm
0.01 mm dia.
F
26 mm
0.1 mm dia.
H
100 mm
0.1 mm dia.
NH
100 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
70 mm
0.2 mm dia.
NT
75 mm
0.1 mm dia.
NV
75 mm
0.1 mm dia.
NVG
8 mm
0.1 mm dia.
VG
8 mm
0.1 mm dia.
16
Part number
E32
TC200F
E32-TC200F
E32-TC200F4
E32
TC200F4
E32
E32
J THROUGH-BEAM, SIDE BEAM TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Long
distance
Long
g
di t
distance
Built in lens provides
Built-in
long sensing
distance; each
sensing
g head has
two 3.2
3 2 mm screw
mounting holes;
25 mm bending
g
radius;
di
1 mm ID fiber
fib
Space-saving
p
g
mounting;
ti
25 mm
bending radius;
1 mm ID fiber
Appearance
2 m (6.56 ft) length
3 mm
(
(0.12
in)
i )
dia. x 35
mm (1.38
in) L
2 m (6.56 ft) length
Type
Detection distance
Min. detectable
object (opaque)
A
900 mm
0.2 mm dia.
DAN-HS
1,250 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
4,000 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
3,400 mm
0.01 mm dia.
F
380 mm
0.2 mm dia.
H
1,800 mm
0.2 mm dia.
NH
1,800 mm
0.08 mm dia.
NHB
200mm
0.08 mm dia.
NM
1,000 mm
0.2 mm dia.
NT
1,070 mm
0.2 mm dia.
NV
1,070 mm
0.2 mm dia.
NVG
80 mm
0.2 mm dia.
VG
80 mm
0.2 mm dia.
A
120 mm
0.1 mm dia.
DAN-HS
170 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
570 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
460 mm
0.01 mm dia.
F
30 mm
0.2 mm dia.
H
240 mm
0.2 mm dia.
NH
240 mm
0.08 mm dia.
NHB
30 mm
0.08 mm dia.
NM
130 mm
0.3 mm dia.
NT
140 mm
0.2 mm dia.
NV
140 mm
0.2 mm dia.
NVG
10 mm
0.1 mm dia.
VG
10 mm
0.1 mm dia.
17
Part number
E32-T14
E32-T14L
E32
E32
J THROUGH-BEAM, SIDE BEAM TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Area
sensing
Area
sensing
i
10 mm wide beam,
long sensing
distance; 25 mm
bending
g radius;;
1 mm ID fiber;
fib
includes 0.5 mm and
1 mm slit masks
11 mm wide beam;;
fl ibl cable
flexible
bl allows
ll
10 mm bending
radius; 1 mm ID
fib includes
fiber;
i l d
0.5 mm and 1 mm
slit masks
Appearance
10 mm
2 m (6.56 ft) length
11 mm
2 m (6.56
(6 56 ft) length
l
th
Type
Detection distance
Min. detectable
object (opaque)
A
750 mm
6.0 mm dia.*
DAN-HS
1,000 mm
-- -- -- -- -- -- -- -- -- -- --
DAN-LD
3,500 mm
-- -- -- -- -- -- -- -- -- -- --
DAN-SM
2,800 mm
0.6 mm dia.
F
330 mm
7.0 mm dia.*
H
1,500 mm
6.0 mm dia.*
NH
1,500 mm
2.0 mm dia.*
NHB
700 mm
2.0 mm dia.*
NM
1,000 mm
5.0 mm dia.*
NT
1,070 mm
5.0 mm dia.*
NV
1,070 mm
5.0 mm dia.*
NVG
150 mm
7.0 mm dia.*
VG
150 mm
7.0 mm dia.*
A
300 mm
2.0 mm dia.*
DAN-HS
420 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
1,400 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
1,100 mm
0.2 mm dia.
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
600 mm
0.4 mm dia.*
NHB
Contact Omron
Contact Omron
NM
400 mm
1.0 mm dia.*
NT
480 mm
1.3 mm dia.*
NV
480 mm
1.3 mm dia.*
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
Note: *This value was measured at a sensing distance of 100 mm.
18
Part number
E32-T16
E32-T16P
E32
E32
J THROUGH-BEAM, SIDE BEAM TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Small
objects;
side view
sensing
g
1 mm dia. x
15 mm L
A
45 mm
0.1 mm dia.
DAN-HS
55 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
150 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
130 mm
0.01 mm dia.
F
15 mm
0.3 mm dia.
H
90 mm
0.1 mm dia.
NH
90 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
45 mm
0.2 mm dia.
NT
48 mm
0.1 mm dia.
NV
48 mm
0.1 mm dia.
NVG
2 mm
0.2 mm dia.
VG
2 mm
0.2 mm dia.
Suitable for detecting
minute objects; 304
stainless steel
needle tip;
p; 25 mm
b di radius;
bending
di
0.5 mm ID fiber
2 mm dia.
di x
15 mm L
2 m (6.56
(6 56 ft) length
19
Part number
E32-T24
E32
E32
J THROUGH-BEAM, HIGH TEMPERATURE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Heat
resistant
Heat
resistant
i t t
Resists 150°C;
150 C; fiber
sheath material:
fluororesin
fluororesin.
Operating
p
g ambient
temperature: -- 40_C
0 C
to 150_C (-- 40_F to
302_F);
); 1.5 mm ID
fib
fiber
Resists 300°C,, with
spiral
i l tube;
t b high
hi h
mechanical strength;
fiber sheath material:
stainless
t i l
steel.
t l
Operating ambient
temperature:
-- 40_C to 300_C
(-- 40
40_F
F to 572
572_F);
F);
1 mm ID fiber
Appearance
M4 threaded head x
17 mm (0.67
(0 67 in) L
2 m (6.56
(6 56 ft) length
M4 threaded head x
20 mm (0.79
(0 79 in) L
2 m (6.56
(6 56 ft) length
Type
Detection distance
Min. detectable
object (opaque)
A
200 mm
1.0 mm dia.
DAN-HS
280 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
950 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
760 mm
0.01 mm dia.
F
80 mm
1.0 mm dia.
H
400 mm
1.0 mm dia.
NH
400 mm
0.4 mm dia.
NHB
35 mm
0.4 mm dia.
NM
300 mm
0.4 mm dia.
NT
320 mm
0.3 mm dia.
NV
320 mm
0.3 mm dia.
NVG
20 mm
1.0 mm dia.
VG
20 mm
1.0 mm dia.
A
150 (1,500*) mm
0.2 mm dia.
DAN-HS
170 (1,300*) mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
570 (4,000**) mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
450 (3,400*) mm
0.01 mm dia.
F
60 (450*) mm
0.5 mm dia.
H
300 (3,000*) mm
0.3 mm dia.
NH
300 (3,000*) mm
0.12 mm dia.
NHB
Contact Omron
Contact Omron
NM
180 (2,000*) mm
0.2 mm dia.
NT
190 (2,100*) mm
0.15 mm dia.
NV
190 (2,100*) mm
0.15 mm dia.
NVG
18 (130*) mm
0.5 mm dia.
VG
18 (130*) mm
0.5 mm dia.
Note: * Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
**Value in parentheses is based on each fiber having a cable length of 2,000 mm.
20
Part number
E32-T51
E32-T61
E32
E32
J THROUGH-BEAM, SPECIAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Mark/edge
detection
Area
sensing
i
Ideal for mark
sensing or belt
alignment; no optical
axis adjustment
j
required;
i d easy to
mount; 1 mm ID fiber
Use with
E3XA CC4A for
E3XA-CC4A
f
shape recognition;
0.5 mm ID fiber
Appearance
10 mm
2 m (6.56
(6 56 ft) llength
th
M3 threaded head
x11 mm (0.43
(0 43 in) L
2 m (6.56
(6 56 ft) llength
th
Type
Detection distance
Min. detectable
object (opaque)
A
10 mm
0.5 mm dia.
DAN-HS
10 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
10 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
10 mm
0.16 mm dia.
F
10 mm
0.5 mm dia.
H
10 mm
Contact Omron
NH
10 mm
Contact Omron
NHB
Contact Omron
Contact Omron
NM
10 mm
0.7 mm dia.
NT
10 mm
0.4 mm dia.
NV
10 mm
0.4 mm dia.
NVG
10 mm
0.6 mm dia.
VG
10 mm
0.6 mm dia.
A
150 mm
0.3 mm dia.
DAN-HS
250 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
700 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
610 mm
0.01 mm dia.
F
65 mm
0.3 mm dia.
H
300 mm
0.4 mm dia.
NH
300 mm
0.04 mm dia.
NHB
Contact Omron
Contact Omron
NM
200 mm
0.2 mm dia.
NT
210 mm
0.1 mm dia.
NV
210 mm
0.1 mm dia.
NVG
20 mm
0.3 mm dia.
VG
20 mm
0.3 mm dia.
21
Part number
E32-G14
E32-M21
E32
E32
J THROUGH-BEAM, SPECIAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Chemical
resistant
Wafer
d t ti
detection
Teflon
coated
Teflon-coated
sensing head for
harsh chemical
environments.
O
Operating
i ambient
bi
temperature: -- 30_C
to 70_C (( - 22_F to
1 8 F) 1 mm ID
158_F);
fiber; 40 mm bending
radius
Ultra narrow beam is
id l for
ideal
f sensing
i
silicon wafers;
10 mm bending
g
radius
di
Appearance
Type
Detection distance
Min. detectable
object (opaque)
A
800 mm
0.9 mm dia.
5 mm dia. x 20 mm
(0.79 in L)
DAN-HS
1,100 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
3,800 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
3,000 mm
0.01 mm dia.
F
300 mm
0.7 mm dia.
H
1,600 mm
0.7 mm dia.
NH
1,600 mm
0.12 mm dia.
NHB
220 mm
0.12 mm dia.
NM
1,000 mm
0.3 mm dia.
NT
1,070 mm
0.3 mm dia.
NV
1,070 mm
0.3 mm dia.
NVG
70 mm
0.6 mm dia.
VG
70 mm
0.6 mm dia.
A
Contact Omron
Contact Omron
3.0 mm dia.
DAN-HS
700 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-LD
2,300 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
1,900 mm
0.01 mm dia.
F
Contact Omron
Contact Omron
H
1,000 mm
Contact Omron
NH
1,000 mm
0.08 mm dia.
NHB
Contact Omron
Contact Omron
NM
650 mm
0.4 mm dia.
NT
650 mm
0.2 mm dia.
NV
650 mm
0.2 mm dia.
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
22
Part number
E32-T12F
E32-T22S
E32
E32
J THROUGH-BEAM, SPECIAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Wafer
detection
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A
Contact Omron
Contact Omron
E32-T24S
DAN-HS
500 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
1,700 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
1,300 mm
0.01 mm dia.
F
Contact Omron
Contact Omron
H
700 mm
Contact Omron
NH
700 mm
0.08 mm dia.
NHB
Contact Omron
Contact Omron
NM
450 mm
0.4 mm dia.
NT
480 mm
0.2 mm dia.
NV
480 mm
0.2 mm dia.
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
A
Contact Omron
Contact Omron
DAN-HS
500 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
1,700 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
1,300 mm
0.01 mm dia.
2 m (6.56 ft) length F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
700 mm
0.12 mm dia.
NHB
Contact Omron
Contact Omron
NM
450 mm
0.3 mm dia.
NT
480 mm
0.3 mm dia.
NV
480 mm
0.3 mm dia.
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
Side view with
3.5
3 5 x 3 mm
narrow field of vision; dia.
10 mm bending
radius
2 m (6.56 ft) length
Heat
resistant
i t t
Side view with
stainless
t i l
steel
t l spiral
i l
tube sheath; resists
200°C (392°F)
(
) at the
fib tip;
fiber
ti 25 mm
bending radius
3 mm dia.
23
E32-T84S
E32
T84S
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
High
accuracy
positioning
Flexible
( i t
(resists
breaking)
Concentric beam:
emitter in the center
and a ring of 16
receivers in the 2.5
mm dia.
di tip;
i 25
2 mm
bending radius;
1 mm ID fiber
Thin fiber for small
object
bj t detection,
d t ti
ultra flexible cable;
4 mm bending
g
radius;
di
0.25
0 25 mm ID
fiber
Appearance
M6 threaded head x
20 mm (0.79 in) L
2 m (6.56 ft) length
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
75 mm
0.03 mm dia.
DAN-HS
100 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
400 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
300 mm
0.01 mm dia.
F
33 mm
0.03 mm dia.
H
150 mm
0.015 mm dia.
NH
150 mm
0.012 mm dia.
NHB
20 mm
0.012 mm dia.
NM
100 mm
0.015 mm dia.
NT
110 mm
0.012 mm dia.
NV
110 mm
0.012 mm dia.
NVG
10 mm
0.5 mm dia.
VG
10 mm
0.5 mm dia.
A
45 mm
0.03 mm dia.
80 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
220 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
170 mm
0.01 mm dia.
F
20 mm
0.03 mm dia.
H
90 mm
0.015 mm dia.
NH
90 mm
0.012 mm dia.
NHB
12 mm
0.012 mm dia.
NM
60 mm
0.015 mm dia.
NT
65 mm
0.012 mm dia.
NV
65 mm
0.012 mm dia.
NVG
7 mm
0.5 mm dia.
VG
7 mm
0.5 mm dia.
M6 threaded head x DAN-HS
17 mm (0.67
(0 67 in)
i )L
2 m (6.56
(
ft)
f ) length
l
h
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
24
Part number
E32-CC200
E32-D11
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Long
distance
Flexible
( i t
(resists
breaking)
Compact threaded
sensing head;
25 mm bending
radius;; 1 mm ID fiber
High
g flexibilityy with
1 mm minimum
i i
bending radius
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
100 mm
0.015 mm dia.
DAN-HS
150 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
500 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
400 mm
0.01 mm dia.
F
45 mm
0.2 mm dia.
H
200 mm
0.015 mm dia.
NH
200 mm
0.012 mm dia.
NHB
26 mm
0.012 mm dia.
NM
150 mm
0.015 mm dia.
NT
160 mm
0.012 mm dia.
NV
160 mm
0.012 mm dia.
NVG
10 mm
3.0 mm dia.
VG
10 mm
3.0 mm dia.
A
45 mm
0.03 mm dia.
M6 screw x 17 mm
(0.67 in) L
DAN-HS
80 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-LD
220 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
170 mm
0.01 mm dia.
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
90 mm
0.02 mm dia.
NHB
Contact Omron
Contact Omron
NM
60 mm
0.02 mm dia.
NT
65 mm
0.02 mm dia.
NV
65 mm
0.02 mm dia.
NVG
45 mm
0.03 mm dia.
VG
45 mm
0.03 mm dia.
M6 threaded head x
17 mm (0.67
(0 67 in)
i )L
2 m (6.56
(
ft)
f ) length
l
h
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
25
Part number
E32-D11L
E32-D11R
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Appearance
Flexible
(resists
breaking)
M3 threaded head x
11 mm (0.43
(0 43 in) L
Long
g
di t
distance
Flexible thin fiber
requires just 4 mm
bending radius;
mount on moving
g
machinery
hi
sections;
i
0.25 mm ID fiber
Small sensing
g head
i easy to
is
t mount;
t
25 mm bending
radius
2 m (6.56
(6 56 ft) length
M4 threaded head x
12 mm (0.47
(0 47 in) L
2 m (6.56
(6 56 ft) length
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
7 mm
0.03 mm dia.
DAN-HS
10 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
40 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
30 mm
0.01 mm dia.
F
3 mm
0.03 mm dia.
H
14 mm
0.015 mm dia.
NH
14 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
8 mm
0.015 mm dia.
NT
9 mm
0.012 mm dia.
NV
9 mm
0.012 mm dia.
NVG
1 mm
1.0 mm dia.
VG
1 mm
1.0 mm dia.
A
25 mm
0.03 mm dia.
DAN-HS
45 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
160 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
130 mm
0.01 mm dia.
F
11 mm
0.26 mm dia.
H
50 mm
0.015 mm dia.
NH
50 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
35 mm
0.015 mm dia.
NT
38 mm
0.012 mm dia.
NV
38 mm
0.012 mm dia.
NVG
1 mm
1.0 mm dia.
VG
1 mm
1.0 mm dia.
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
26
Part number
E32-D21
E32-D21L
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Appearance
Flexible
(resists
breaking)
M3 screw x 11 mm
(0 43 in) L
(0.43
Long
g
di t
distance
Easy to mount senssens
ing head with high
flexibility cable; 1
mm bending
g radius
Small diameter head
fit space-confined
fits
fi d
installations; 25 mm
bending
g radius;
0 5 mm ID fiber
0.5
fib
2 m (6.56
(6 56 ft) length
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
7 mm
0.03 mm dia.
DAN-HS
10 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
40 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
30 mm
0.01 mm dia.
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
14 mm
0.02 mm dia.
NHB
NA
NA
NM
8 mm
0.02 mm dia.
NT
9 mm
0.02 mm dia.
NV
9 mm
0.02 mm dia.
NVG
NA
NA
VG
NA
NA
A
25 mm
0.03 mm dia.
DAN-HS
45 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
3 mm (0.12
(0 12 in) dia.
dia x
15 mm (0.59
(
in)) L
DAN-LD
(
g
2 m (6.56
ft)) length
160 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
130 mm
0.01 mm dia.
F
11 mm
0.26 mm dia.
H
50 mm
0.015 mm dia.
NH
50 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
35 mm
0.015 mm dia.
NT
38 mm
0.012 mm dia.
NV
38 mm
0.012 mm dia.
NVG
1 mm
1.0 mm dia.
VG
1 mm
1.0 mm dia.
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
27
Part number
E32-D21R
E32-D22L
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Precise
positioning
Coaxial
diffuse for
precise
positioning
Concentric beam:
light source in the
center with a ring of
4 receivers in 2 mm
dia. tip; 25 mm
bending radius;
0.25 mm ID fiber
Concentric beam:
light source in the
center with a ring of
16 receivers in 3 mm
dia. tip; 25 mm
bending radius
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
20 mm
0.03 mm dia.
DAN-HS
25 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
DAN-SM
100 mm
75 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -0.01 mm dia.
F
9 mm
0.03 mm dia.
H
40 mm
0.015 mm dia.
NH
40 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
30 mm
0.015 mm dia.
NT
33 mm
0.012 mm dia.
NV
33 mm
0.012 mm dia.
NVG
2.5 mm
0.5 mm dia.
VG
2.5 mm
0.5 mm dia
A
40 mm
0.04 mm dia.
3 mm (0.12 in) dia.
x 15 mm (0.59 in) L
DAN-HS
50 mm
0.01 mm dia.
DAN-LD
200 mm
0.01 mm dia.
2 m (6.56 ft) length
DAN-SM
150 mm
0.01 mm dia.
F
11 mm
1.1 mm dia,
H
80 mm
0.015 mm dia.
NH
80 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
60 mm
0.04 mm dia.
NT
65 mm
0.012 mm dia.
NV
65 mm
0.012 mm dia.
NVG
4 mm
1 mm dia.
VG
4 mm
1 mm dia.
2 mm (0.08
(0 08 in) dia.
dia
(
x 15 mm (0.59
in))
tip;
ti 29 mm (1.14
(1 14
in) L overall
2 m (6.56 ft) length
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
28
Part number
E32-D32
E32-D32L
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
Compact threaded
head; short cable
length; 25 mm bending
g radius
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
75 mm
0.015 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
33 mm
0.015 mm dia.
H
150 mm
0.015 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
10 mm
0.2 mm dia.
A
75 mm
0.015 mm dia.
M6 threaded head x
14 mm (0.55 in) L
DAN-HS
100 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
400 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
300 mm
0.01 mm dia.
F
33 mm
0.015 mm dia.
H
150 mm
0.015 mm dia.
NH
150 mm
0.012 mm dia.
NHB
20 mm
0.012 mm dia.
NM
100 mm
0.015 mm dia.
NT
110 mm
0.012 mm dia.
NV
110 mm
0.012 mm dia.
NVG
10 mm
0.2 mm dia.
VG
10 mm
0.2 mm dia.
M6 threaded head x
14 mm (0.55 in) L
50 cm (19 in) length
General
purpose
Compact
p
threaded
h d 25 mm bendhead;
b d
ing radius; 1 mm ID
fiber
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
29
Part number
E32-DC50
E32-DC200
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
Appearance
Coiled cable ideal for
moving parts; 25 mm
bending radius;
M6 threaded head x
1 mm ID fiber
17 mm (0.67 in) L
Coiled 64 cm
(2 1 ft) L
(2.1
L; 2 m
(6.56 ft) extended
General
purpose
Thin fiber with small
easy-to-mount
head ; 25 mm bendhead.;
ing
g radius;; 0.5 mm
ID fiber
fib
M3 threaded head x
11 mm (0.43
(0 43 in)
i )L
2 m (6.56
(6 56 ft) length
l
th
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
22 mm
0.03 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
10 mm
0.03 mm dia.
H
44 mm
0.015 mm dia.
NH
44 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
30 mm
0.015 mm dia.
NT
33 mm
0.012 mm dia.
NV
33 mm
0.012 mm dia.
NVG
2.5 mm
1.0 mm dia.
VG
2.5 mm
1.0 mm dia.
A
18 mm
0.03 mm dia.
DAN-HS
30 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
100 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
80 mm
0.01 mm dia.
F
8 mm
0.03 mm dia.
H
36 mm
0.015 mm dia.
NH
36 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
20 mm
0.015 mm dia.
NT
22 mm
0.012 mm dia.
NV
22 mm
0.012 mm dia.
NVG
2 mm
1.0 mm dia.
VG
2 mm
1.0 mm dia.
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
30
Part number
E32-DC200C
E32-DC200E
E32
E32
J DIFFUSE, GENERAL PURPOSE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
Compact threaded
head; 25 mm bending radius; 1 mm ID
fiber
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
75 mm
0.015 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
33 mm
0.015 mm dia.
H
150 mm
0.015 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
10 mm
0.2 mm dia.
A
75 mm
0.015 mm dia.
M6 threaded head x
14 mm (0.55 in) L
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
10 m (32.8 ft)
length
DAN-SM
Contact Omron
Contact Omron
F
33 mm
0.015 mm dia.
H
150 mm
0.015 mm dia.
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
10 mm
0.2 mm dia.
M6 threaded head x
14 mm (0.55 in) L
5 m (16.4 ft) length
General
purpose
Compact threaded
head; 25 mm bending radius; 1 mm ID
fiber
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
31
Part number
E32-DC500
E32-DC1000
E32
E32
J DIFFUSE, ARMORED TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
General
purpose
Can withstand
temperatures to
150°C (302°F)
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
Part number
A
80 mm
0.03 mm dia.
E32
UDAT1 3F
E32-UDAT1-3F
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
A
65 mm
0.03 mm dia.
5/16 -- 24 thread x
38.1 mm (1.5 in) L
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
1.83 m (6 ft) length
DAN-SM
Contact Omron
Contact Omron
F
Contact Omron
Contact Omron
H
Contact Omron
Contact Omron
NH
Contact Omron
Contact Omron
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
Contact Omron
Contact Omron
E3JU-X
only
90 mm
0.05 mm dia.
E32-UDBT1-3F
E3JU-X
only
80 mm
0.05 mm dia.
E32-UDBT1-6F
5/16 -- 24 thread x
38.1 mm (1.5 in) L
0.91 m (3 ft) length
General
purpose
Can withstand
temperatures to
150°C (302°F)
General
purpose
Can withstand
temperatures to
200°C (392°F)
General
purpose
Can withstand
temperatures to
200°C (392°F)
5/16 -- 24 thread x
38.1 mm (1.5 in) L
E32-UDAT1-6F
E32
UDAT1 6F
0.91 m (3 ft) length
5/16 -- 24 thread x
38.1 mm (1.5 in) L
1.83 m (6 ft) length
32
E32
E32
J DIFFUSE, PROBE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Needle
probe
Thin probe
Super thin tip for
minute object detection; 25 mm bending
radius;;
0 2 mm ID fiber
0.25
fib
Probe for spacespace
confined sensing
areas; 25 mm
bending
g radius;;
1 mm ID fiber
fib
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
Part number
A
5 mm
0.015 mm dia.
E32-D33
DAN-HS
6 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
21 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
16 mm
0.01 mm dia.
F
1.8 mm
0.03 mm dia.
H
10 mm
0.015 mm dia.
NH
10 mm
0.012 mm dia.
NHB
NA
NA
NM
6 mm
0.015 mm dia.
NT
7 mm
0.012 mm dia.
NV
7 mm
0.012 mm dia.
NVG
NA
NA
VG
NA
NA
A
75 mm
0.03 mm dia.
M6 threaded head
90 mm (3.54
(
in)
i )
probe length
DAN-HS
100 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
400 mm
-- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
300 mm
0.01 mm dia.
F
33 mm
0.03 mm dia.
H
150 mm
0.015 mm dia.
NH
150 mm
0.012 mm dia.
NHB
20 mm
0.012 mm dia.
NM
100 mm
0.015 mm dia.
NT
110 mm
0.012 mm dia.
NV
110 mm
0.012 mm dia.
NVG
10 mm
1.0 mm dia.
VG
10 mm
1.0 mm dia.
3 mm
dia
dia.
0.8 mm
di
dia.
2 m (6.56
(6 56 ft) length
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
33
E32-DC200B
E32
E32
J DIFFUSE, PROBE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Thin probe
Thin probe
Probe for spacespace
confined sensing
areas; 25 mm
bending
g radius;;
1 mm ID fiber
fib
Sensing head with
90 mm probe; spiral
coiled cable with-stands repeated
p
stretching
hi from
f
reciprocating
p
;
machine parts;
25
2 mm bending
b di
radius; 1 mm ID fiber
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
Part number
E32-DC200B4
A
75 mm
0.03 mm dia.
M6 threaded head
40 mm (1.57
(1 57 in)
probe length
p
g
DAN-HS
100 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
400 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
300 mm
0.01 mm dia.
F
33 mm
0.03 mm dia.
H
150 mm
0.015 mm dia.
NH
150 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
100 mm
0.015 mm dia.
NT
110 mm
0.012 mm dia.
NV
110 mm
0.012 mm dia.
NVG
10 mm
1.0 mm dia.
VG
10 mm
1.0 mm dia.
A
22 mm
0.03 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
10 mm
0.03 mm dia.
H
44 mm
0.015 mm dia.
NH
44 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
2.5 mm
1.0 mm dia.
M6 threaded head
90 mm (3.54 in)
probe length
Coiled 64 cm
((2.1 ft)) L;;
2 m (6.56
(6 56 ft)
extended
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
34
E32-DC200D
E32
E32
J DIFFUSE, PROBE TYPE (CONT.)
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Thin probe
Thin probe
Sensing head with
40 mm probe; spiral
coiled cable withwith
stands repeated
stretching from
reciprocating
machine parts;
25 mm bending
radius; 1 mm ID fiber
Sensing head with
90 mm probe; 25
mm bending radius;
0.5 mm ID fiber
Appearance
M6 threaded
th
d d head
h d
40 mm (1.57 in)
probe
b length
l
th
Coiled
C
il d 64 cm
(2.1 ft) L;
2 m (6.56 ft)
extended
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
Part number
A
22 mm
0.03 mm dia.
DAN-HS
Contact Omron
Contact Omron
E32-DC200D4
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
10 mm
0.03 mm dia.
H
44 mm
0.015 mm dia.
NH
44 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
2.5 mm
1.0 mm dia.
A
18 mm
0.03 mm dia.
M3 threaded head
90 mm (3.54
(3 54 in)
length
g probe
p
DAN-HS
30 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
100 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56
(
ft)) length
g
DAN-SM
80 mm
0.01 mm dia.
F
8 mm
0.03 mm dia.
H
36 mm
0.015 mm dia.
NH
36 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
20 mm
0.015 mm dia.
NT
22 mm
0.012 mm dia.
NV
22 mm
0.012 mm dia.
NVG
2 mm
1.0 mm dia.
VG
2 mm
1.0 mm dia.
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
35
E32-DC200F
E32
E32
J DIFFUSE, PROBE TYPE (CONT.)
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Thin probe
Thin probe
Thin probe
Sensing head with
40 mm probe; 25
mm bending radius;
0.5 mm ID fiber
90 mm length probe
mounts directly to
amplifier; stainless
steel probe;
p
; 1 mm ID
fib with
fiber
i h 25
2 mm
bending radius
40 mm length probe
mounts directly to
amplifier; stainless
p
; 1 mm ID
steel probe;
fiber
fib with
i h 25
2 mm
bending radius
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
18 mm
0.03 mm dia.
M3 threaded head
40 mm (1.57 in)
length probe
DAN-HS
30 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
100 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-SM
80 mm
0.01 mm dia.
F
8 mm
0.03 mm dia.
H
36 mm
0.015 mm dia.
NH
36 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
20 mm
0.015 mm dia.
NT
22 mm
0.012 mm dia.
NV
22 mm
0.012 mm dia.
NVG
2 mm
1.0 mm dia.
VG
2 mm
1.0 mm dia.
A
30 mm
0.03 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
9 mm
0.03 mm dia.
H
60 mm
0.015 mm dia.
NH
60 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
2.5 mm
1.0 mm dia.
A
30 mm
0.03 mm dia.
DAN-HS
Contact Omron
Contact Omron
DAN-LD
Contact Omron
Contact Omron
DAN-SM
Contact Omron
Contact Omron
F
9 mm
0.03 mm dia.
H
60 mm
0.015 mm dia.
NH
60 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
Contact Omron
Contact Omron
NT
Contact Omron
Contact Omron
NV
Contact Omron
Contact Omron
NVG
Contact Omron
Contact Omron
VG
2.5 mm
1.0 mm dia.
1 2 mm dia.
1.2
dia
1 2 mm dia.
1.2
dia
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
36
Part number
E32-DC200F4
E32-DC9G
E32
DC9G
E32-DC9G4
E32
DC9G4
E32
E32
J DIFFUSE, SIDE BEAM TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Long
distance;
side view
sensing
g
Small
object
Space
saving, side
Space-saving,
view probe for long
sensing distances;
1 mm ID fiber;;
2 mm bending
25
b di
radius
Side view; space
saving thin fiber;
0 5 mm ID fiber;
0.5
25 mm bending
g
radius
di
Appearance
6 mm dia.
2 m (6.56 ft) length
2 mm dia.
dia
3 mm dia.
2 m (6.56 ft) length
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
Part number
A
40 mm
0.03 mm dia.
DAN-HS
50 mm
-- -- -- -- -- -- -- -- -- -- --
E32-D14L
DAN-LD
150 mm
-- -- -- -- -- -- -- -- -- -- --
DAN-SM
110 mm
0.01 mm dia.
F
12 mm
0.5 mm dia.
H
40 mm
0.03 mm dia.
NH
40 mm
0.015 mm dia.
NHB
Contact Omron
Contact Omron
NM
40 mm
0.03 mm dia.
NT
44 mm
0.015 mm dia.
NV
44 mm
0.015 mm dia.
NVG
1.5 mm
1.0 mm dia.
VG
1.5 mm
1.0 mm dia.
A
15 mm
0.03 mm dia.
DAN-HS
10 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
40 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
30 mm
0.01 mm dia.
F
4 mm
0.03 mm dia.
H
15 mm
0.03 mm dia.
NH
15 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
15 mm
0.03 mm dia.
NT
17 mm
0.012 mm dia.
NV
17 mm
0.012 mm dia.
NVG
1.6 mm
1.0 mm dia.
VG
1.6 mm
1.0 mm dia.
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
37
E32-D24
E32
E32
J DIFFUSE, HIGH TEMPERATURE TYPE
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Heat
resistant
Heat
resistant
Heat
resistant
Resists 150°C;
150 C; fiber
sheath material: fluororesin.
roresin
Operating
p
g ambient
t
temperature:
t
-- 40_C
to 150_C (-- 40_F to
302_F);
); 1.5 mm ID
fib 35
fiber;
3 mm bending
b di
radius
Resists 300°C,
300 C, with
spiral tube; high
mechanical strength;
fiber sheath material:
stainless
i l
steel.
l
Operating ambient
temperature:
p
-- 40_C
0 C to 300_C
300 C
(-- 40_F to 572_F);
1.4 mm ID fiber;; 25
mm bending
b di radius
di
High temperature
glass core fiber with
probe Resists
probe.
p
400°C,, with spiral
tube;
b high
hi h mechanih i
cal strength; fiber
sheath material:
stainless
t i l
steel.
t l
Operating ambient
temperature:
p
-- 40_C to
t 400_C
(-- 40_F to 752_F);
1 mm ID fiber;;
b di
25 mm bending
radius
Appearance
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
60 mm
0.03 mm dia.
M6 threaded head
DAN-HS
100 mm
-- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-LD
300 mm
-- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
230 mm
0.01 mm dia.
F
26 mm
0.03 mm dia.
H
120 mm
0.03 mm dia.
NH
120 mm
0.012 mm dia.
NHB
12 mm
0.012 mm dia.
NM
60 mm
0.03 mm dia.
NT
65 mm
0.012 mm dia.
NV
65 mm
0.012 mm dia.
NVG
5 mm
1.0 mm dia.
VG
5 mm
1.0 mm dia.
A
45 mm
0.03 mm dia.
M6 threaded head
DAN-HS
30 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length
DAN-LD
120 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
90 mm
0.01 mm dia.
F
20 mm
0.03 mm dia.
H
45 mm
0.03 mm dia.
NH
45 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
45 mm
0.03 mm dia.
NT
50 mm
0.012 mm dia.
NV
50 mm
0.012 mm dia.
NVG
5 mm
1.0 mm dia.
VG
5 mm
1.0 mm dia.
A
30 mm
0.03 mm dia.
1.25 mm dia DAN-HS
20 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
80 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
2 m (6.56 ft) length DAN-SM
60 mm
0.01 mm dia.
F
17 mm
0.2 mm dia.
H
30 mm
0.03 mm dia.
NH
30 mm
0.012 mm dia.
NHB
Contact Omron
Contact Omron
NM
30 mm
0.03 mm dia.
NT
33 mm
0.012 mm dia.
NV
33 mm
0.012 mm dia.
NVG
3 mm
1.0 mm dia.
VG
3 mm
1.0 mm dia.
M4 threaded head
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
38
Part number
E32-D51
E32-D61
E32
D61
E32-D73
E32
D73
E32
E32
J DIFFUSE, CONVERGENT AND SPECIAL PURPOSE TYPES
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Chemical
resistant
Wafer
detection,
height
differences
Teflon coated
sensing head for
harsh chemical
environments.
O
Operating
i ambient
bi
temperature: -- 30_C
to 70_C (( - 22_F to
1 8 F) 40
158_F);
0 mm
bending radius;
1 mm ID fiber
Convergent beam
suppresses background objects; long
distance,, side view.
O
Operating
i ambient
bi
temperature: -- 40_C
( - 40_F to
to 105_C (221_F); 10 mm
bending radius
Appearance
6 mm dia.
2 m (6.56 ft) length
2 m (6.56 ft) length
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
50 mm
0.03 mm dia.
DAN-HS
45 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
120 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
95 mm
0.01 mm dia.
F
20 mm
0.5 mm dia.
H
50 mm
0.03 mm dia.
NH
50 mm
0.012 mm dia.
NHB
10 mm
0.012 mm dia.
NM
50 mm
0.03 mm dia.
NT
55 mm
0.012 mm dia.
NV
55 mm
0.012 mm dia.
NVG
4 mm
0.5 mm dia.
VG
4 mm
0.5 mm dia.
A
4 ± 2 mm
0.015 mm dia.
DAN-HS
4 ± 2 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
4 ± 2 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
4 ± 2 mm
0.01 mm dia.
F
4 ± 2 mm
0.015 mm dia.
H
4 ± 2 mm
Contact Omron
NH
4 ± 2 mm
0.012 mm dia.
NHB
NA
NA
NM
4 ± 2 mm
0.015 mm dia.
NT
4 ± 2 mm
0.012 mm dia.
NV
4 ± 2 mm
0.012 mm dia.
NVG
NA
NA
VG
NA
NA
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
39
Part number
E32-D12F
E32-L24L
E32
E32
J DIFFUSE, CONVERGENT TYPES (CONT.)
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Wafer
detection,
height
differences
Wafer
d
detection,
i
height
differences
Wafer
detection,
height
differences
Convergent beam
suppresses background objects;
cable exits the side;
25 mm bending
radius
Convergent beam
suppresses backb k
ground objects;
cable exits the
b
bottom;
2
25 mm
bending radius
Long distance concon
vergent beam type
suppresses background objects;
g
j
;
cable
bl exits
i the
h side;
id
10 mm bending
radius
Appearance
2 m (6.56 ft) length
2 m (6.56 ft) length
2 m (6.56
(6 56 ft) length
Type
Detection distance
(see note)
Min. detectable
object (gold wire)
A
3.3 mm
0.03 mm dia.
DAN-HS
3.3 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
3.3 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
3.3 mm
0.01 mm dia.
F
3.3 mm
0.5 mm dia.
H
3.3 mm
0.015 mm dia.
NH
3.3 mm
0.012 mm dia.
NHB
NA
NA
NM
3.3 mm
0.015 mm dia.
NT
3.3 mm
0.012 mm dia.
NV
3.3 mm
0.012 mm dia.
NVG
NA
NA
VG
NA
NA
A
3.3 mm
0.03 mm dia.
DAN-HS
3.3 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
3.3 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
3.3 mm
0.01 mm dia.
F
3.3 mm
0.5 mm dia.
H
3.3 mm
0.015 mm dia.
NH
3.3 mm
0.012 mm dia.
NHB
NA
NA
NM
3.3 mm
0.015 mm dia.
NT
3.3 mm
0.012 mm dia.
NV
3.3 mm
0.012 mm dia.
NVG
NA
NA
VG
NA
NA
A
7.2 ± 1.8 mm
0.015 mm dia.
DAN-HS
7.2 ± 1.8 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-LD
7.2 ± 1.8 mm
-- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
7.2 ± 1.8 mm
0.01 mm dia.
F
7.2 ± 1.8 mm
0.015 mm dia.
H
7.2 ± 1.8 mm
0.015 mm dia.
NH
7.2 ± 1.8 mm
0.012 mm dia.
NHB
NA
NA
NM
7.2 ± 1.8 mm
0.015 mm dia.
NT
7.2 ± 1.8 mm
0.012 mm dia.
NV
7.2 ± 1.8 mm
0.012 mm dia.
NVG
NA
NA
VG
NA
NA
Note: Sensing distance is based on sensing a white paper that has 90% reflectivity.
40
Part number
E32-L25
E32-L25A
E32-L25L
E32
E32
J RETROREFLECTIVE TYPE
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
NM . . . . . E3X-NM (4 channel auto-tuning amplifier)
NT . . . . . E3X-NT (Auto-tuning amplifier: general purpose)
NH . . . . . E3X-NH (High-precision, auto-tuning amplifier)
NHB . . . . E3X-NHB (High-precision, blue LED, auto-tuning amp)
NV . . . . . E3X-NV21 (Water-resistant, red light source amplifier)
NVG . . . . E3X-NVG21 (Water-resistant, green light source amp)
VG . . . . . E3X-VG (Mark sensing amplifier)
Legend:
A . . . . . . . E3X-A (General purpose amplifier)
DAN-HS E3X-DAN (Digital amplifier-- high speed mode)
DAN-LD E3X-DAN (Digital amplifier-- long distance mode)
DAN-SM E3X-DAN (Digital amplifier-- standard distance mode)
F . . . . . . . E3X-F (High performance amplifier-- high speed)
H . . . . . . . E3X-H11 (High gain amplifier)
Application Features
Detects
shiny,
transparent and
opaque
objects
(polarized))
(p
Detect
transparent objects
(polarized))
(p
Appearance
Block style sensing
head detects objects
over a long range;
25 mm bending
g
radius
di
Detection distance
(see note)
Min. detectable
object (gold wire)
A
150 to 1,500 mm
0.6 mm dia.
DAN-HS
150 to 1,500 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
Reflector
E39-R1 DAN-LD
2 m (6.56
(6 56 ft) length
Compact threaded
sensing head is easy
to install; 25 mm
bending
g radius.
Type
M6
threaded
head
150 to 1,500 mm
-- -- -- -- -- -- -- -- -- -- -- -- -- --
DAN-SM
150 to 1,500 mm
0.2 mm dia.
F
50 to 700 mm
0.6 mm dia.
H
150 to 1,500 mm
0.6 mm dia.
NH
150 to 1,500 mm
0.5 mm dia.
NHB
NA
NA
NM
150 to 1,500 mm
1.9 mm dia.
NT
150 to 1,500 mm
0.5 mm dia.
NV
150 to 1,500 mm
0.5 mm dia.
NVG
NA
NA
VG
NA
NA
A
10 to 250 mm
0.3 mm dia.
DAN-HS
10 to 250 mm
-- -- -- -- -- -- -- -- -- -- -- --
Reflector
E39-R3 DAN-LD
2 m (6.56 ft) length
10 to 250 mm
-- -- -- -- -- -- -- -- -- -- --
DAN-SM
10 to 250 mm
0.1 mm dia.
F
20 to 230 mm
0.5 mm dia.
H
10 to 250 mm
0.3 mm dia.
NH
10 to 250 mm
0.3 mm dia.
NHB
NA
NA
NM
25 to 250 mm
0.6 mm dia.
NT
25 to 250 mm
0.3 mm dia.
NV
25 to 250 mm
0.3 mm dia.
NVG
NA
NA
VG
NA
NA
41
Part number
E32-R16 +
E39-R1
E32-R21 +
E39-R3
E32
E32
J BLOCK STYLE FIBER-OPTIC AMPLIFIERS
The following tables show the detection distance for selected fiber-optic cables in combination with Omron block style amplifiers. These
amplifiers offer specialized capabilities to solve particular application problems.
J E3MC-(M)Y RGB COLOR SENSOR
Through-beam Fiber-optic Cables
Application Features
Appearance
General
purpose
Compact threaded head; 25 mm bending radius; 1 mm
ID fiber
Long
distance
Compact M4, head, 1.mm ID fiber; 25 mm bending
radius; 1.4 mm ID fiber
Area
sensing
10 mm wide beam, long sensing distance; 25 mm
bending radius; 1 mm ID fiber
Detection distance
(see note)
Part number
30 mm
E32-TC200
60 mm
E32-T11L
200 mm
E32-T16
1,100 mm
E32-T17L
M4 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
M4 threaded head x
11 mm (0.43 in) L
2 m (6.56 ft) length
10 mm
2 m (6.56 ft) length
Long
distance
M14 with magnifying lens extends sensing distance;
ideal for explosion-- proof applications; 25 mm bending
radius; 1 mm ID fiber
M14 threaded head
x 23 mm (0.91 in) L
10 m (32.8 ft) length
Note: The E3MC-(M)Y discriminates red, blue, and yellow films at the above distances.
Diffuse Fiber-optic Cables
Application Features
Appearance
High
precision
positioning
Concentric beam: emitter in the center and a ring of 16
receivers in the 2.5 mm dia. tip; 25 mm bending radius;
1 mm ID fiber; coaxial diffuse
General
purpose
Compact threaded head; 25 mm bending radius; 1 mm
ID fiber
Long
distance
Compact threaded sensing head;
25 mm bending radius; 1 mm ID fiber
Precise
positioning
Concentric beam: light source in the center with a ring
of 16 receivers in 3 mm dia. tip; 25 mm bending radius;
coaxial diffuse
Detection distance
(see note)
Part number
5 mm
E32-CC200
5 mm
E32-DC200
5 mm
E32-D11L
4.5 mm
E32-D32L
M6 threaded head x
20 mm (0.79 in) L
2 m (6.56 ft) length
M6 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
M6 threaded head x
17 mm (0.67 in) L
2 m (6.56 ft) length
3 mm (0.12 in) dia.
x 15 mm (0.59 in) L
2 m (6.56 ft) length
Note: The E3MC-(M)Y discriminates eleven colors at the above distances. For a typical example, nine colors are discriminated at a
sensing distance of 12 mm.
42
E32
E32
J E3XA-CC4A ANALOG FIBER-OPTIC AMPLIFIER
Through-beam Fiber-optic Cables
Application Features
General
purpose
Compact threaded head;
25 mm bending radius; 1 mm
ID fiber
General
purpose
M3; possible to mount the
reflective side-view conversion attachment (E39-F5);
25 mm bending radius; 1 mm
ID fiber
Thin probe
Probe for space-confined
sensing areas; 25 mm bending radius; 1 mm ID fiber
Appearance
Detection distance
Min. detectable object
80 mm (600 mm*)
0.2 mm dia.
E32-TC200
80 mm
0.2 mm dia.
E32-TC200A
80 mm
0.2 mm dia.
E32-TC200B
80 mm
0.2 mm dia.
E32-TC200B4
20 mm
0.1 mm dia.
E32-TC200E
20 mm
0.1 mm dia.
E32-TC200F
20 mm
0.1 mm dia.
E32-TC200F4
90 mm
0.8 mm dia.
E32-T14
10 mm
0.8 mm dia.
E32-G14
100 mm
0.3 mm dia.
E32-M21
Part number
M4 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
M3 threaded head x
12.5 mm (0.49 in) L
2 m (6.56 ft) length
M4 threaded head
90 mm (3.54 in)
probe length
2 m (6.56 ft) length
Thin probe
Probe for space-confined
sensing areas; 25 mm bending radius; 1 mm ID fiber
M4 threaded head
40 mm (1.57 in)
probe length
2 m (6.56 ft) length
General
purpose
M3; suitable for detecting
minute objects; 25 mm
bending radius; 0.5 mm ID
fiber
Bendable
probe
Sensing head with 90 mm
probe; 25 mm bending radius
Bendable
probe
Sensing head with 90 mm
probe; 25 mm bending radius
Long
distance
Built-in lens provides long
sensing distance; each
sensing head has two 3.2 mm
screw mounting holes; 25 mm
bending radius; 1 mm ID fiber
Mark/edge
detection
Ideal for mark sensing or belt
alignment; no optical axis
adjustment required; easy to
mount; 1 mm ID fiber
M3 threaded head x
11 mm (0.43 in) L
2 m (6.56 ft) length
M3 threaded head
90 mm (3.54 in)
length probe
2 m (6.56 ft) length
M3 threaded head
40 mm (1.57 in)
length probe
2 m (6.56 ft) length
2 m (6.56 ft) length
10 mm
2 m (6.56 ft) length
Area
sensing
Multiple heads allow shape
recognition; 0.5 mm ID fiber
M3 threaded head
x11 mm (0.43 in) L
2 m (6.56 ft) length
Note: *Value in parentheses represents the sensing distance of the fiber when the E39-F1 lens is attached to its tip.
43
E32
E32
Retroreflective Fiber-- optic Cables with E3XA-CC4A Amplifier
Application Features
Detect
transparent and
shiny
objects
Appearance
Compact threaded sensing
head is easy to install.
M6
threaded
head
Detection distance
Min. detectable object
30 to 200 mm
0.3 mm dia.
Detection distance
Min. detectable object
30 mm
0.03 mm dia.
E32-DC200
30 mm
0.03 mm dia.
E32-CC200
30 mm
0.03 mm dia.
E32-DC200B
30 mm
0.03 mm dia.
E32-DC200B4
7 mm
0.03 mm dia.
E32-DC200E
7 mm
0.03 mm dia.
E32-DC200F
7 mm
0.03 mm dia.
E32-DC200F4
Reflector
E39-R3
Part number
E32-R21 +
E39-R3
2 m (6.56 ft) length
Diffuse Fiber-optic Cables with E3XA-CC4A Amplifier
Application Features
General
purpose
Compact threaded head;
25 mm bending radius; 1 mm
ID fiber
General
purpose
M3; possible to mount the
reflective side-view
conversion attachment
(E39-F5); 25 mm bending
radius; 1 mm ID fiber
Thin probe
Probe for space-confined
sensing areas; 25 mm bending radius; 1 mm ID fiber
Appearance
Part number
M6 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
M6 threaded head x
20 mm (0.79 in) L
2 m (6.56 ft) length
M6 threaded head
90 mm (3.54 in)
probe length
2 m (6.56 ft) length
Thin probe
Probe for space-confined
sensing areas; 25 mm bending radius; 1 mm ID fiber
M6 threaded head
40 mm (1.57 in)
probe length
2 m (6.56 ft) length
General
purpose
M3; suitable for
detecting minute objects;
25 mm bending radius;
0.5 mm ID fiber
Thin probe
Sensing head with 90 mm
probe; 25 mm bending radius;
0.5 mm ID fiber
M3 threaded head x
11 mm (0.43 in) L
2 m (6.56 ft) length
M3 threaded head
90 mm (3.54 in)
length probe
2 m (6.56 ft) length
Thin probe
Sensing head with 40 mm
probe; 25 mm bending radius;
0.5 mm ID fiber
M3 threaded head
40 mm (1.57 in)
length probe
2 m (6.56 ft) length
44
E32
E32
J E3JU-X LIMIT SWITCH STYLE (IR LED)
Armored Through-beam Fiber-optic Cables
Application Features
General
purpose
Can withstand temperatures
to 200_C (392_F)
Appearance
Detection distance
Min. detectable object
400 mm
0.25 mm dia.
E32-UTBT1-3F
400 mm
0.25 mm dia.
E32-UTBT1-6F
Detection distance
Min. detectable
object (gold wire)
90 mm
0.05 mm dia.
E32-UDBT1-3F
80 mm
0.05 mm dia.
E32-UDBT1-6F
Part number
5/16-- 24 thread x
38.1 mm (1.5 in) L
0.91 m (3 ft) length
General
purpose
Can withstand temperatures
to 200_C (392_F)
5/16-- 24 thread x
38.1 mm (1.5 in) L
1.83 m (6 ft) length
Armored Diffuse Fiber-optic Cables
Application Features
General
purpose
Can withstand temperatures
to 200_C (392_F)
Appearance
Part number
5/16 -- 24 thread x
38.1 mm (1.5 in) L
0.91 m (3 ft) length
General
purpose
Can withstand temperatures
to 200_C (392_F)
5/16 -- 24 thread x
38.1 mm (1.5 in) L
1.83 m (6 ft) length
45
E32
E32
J E3JU-XR LIMIT SWITCH STYLE (RED LED)
Through-beam Fiber-optic Cables
Application Features
General
purpose
Compact threaded head;
25 mm bending radius;
1 mm ID fiber
Flexible,
resists
breaking
Ideal for mounting on moving
section; 4 mm bending radius;
1.5 mm ID fiber
Appearance
Detection distance
Min. detectable object
200 mm
0.2 mm dia.
E32-TC200
135 mm
0.5 mm dia.
E32-T11
39 mm
0.2 mm dia.
E32-T21
50 mm
0.2 mm dia.
E32-T22
150 mm
1.0 mm dia.
E32-T51
200 mm
0.2 mm dia.
E32-UTAT1-3F
170 mm
0.2 mm dia.
E32-UTAT1-6F
Part number
M4 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
M4 threaded head
x 11.7 mm (0.46 in) L
2 m (6.56 ft) length
Compact M3 head ideal for
mounting on moving sections;
4 mm bending radius; 0.5 mm
ID fiber
Minute
objects
2 mm dia. head fits in spaceconfined areas; 25 mm
bending radius; 0.5 mm ID
fiber
Heat
resistant
Resists 150°C; fiber sheath
material: fluororesin.
Operating ambient
temperature: -- 40_C to 150_C
(-- 40_F to 302_F); 35 mm
bending radius; 1.5 mm ID
fiber
General
purpose
Armored glass fiber-- optic
cable can withstand temperatures to 200_C (392_F)
M3 threaded head x
11 mm (0.43 in) L
2 m (6.56 ft) length
2 mm dia. (0.8 in) x
22 mm (0.87 in)
2 m (6.56 ft) length
M4 threaded head x
17 mm (0.67 in) L
2 m (6.56 ft) length
5/16--24 thread x
38.1 mm (1.5 in) L
0.91 m (3 ft) length
General
purpose
Armored glass fiber-- optic
cable can withstand temperatures to 200_C (392_F)
5/16--24 thread x
38.1 mm (1.5 in) L
1.83 m (6 ft) length
46
E32
E32
Diffuse Fiber-optic Cables with E3JU-XR Amplifiers
Application Features
General
purpose
Compact threaded head;
25 mm bending radius; 1 mm
ID fiber
General
purpose
Compact threaded head;
4 mm bending radius;
0.25 mm ID fiber
Appearance
Detection distance
Min. detectable object
75 mm
0.015 mm dia.
E32-DC200
45 mm
0.03 mm dia.
E32-D11
7 mm
0.03 mm dia.
E32-D21
18 mm
0.03 mm dia.
E32-D32
60 mm
0.03 mm dia.
E32-D51
80 mm
0.03 mm dia.
E32-UDAT1-3F
65 mm
0.03 mm dia.
E32-UDAT1-6F
Part number
M6 threaded head x
14 mm (0.55 in) L
2 m (6.56 ft) length
M6 threaded head x
17 mm (0.67 in) L
2 m (6.56 ft) length
General
purpose
Compact threaded head;
4 mm bending radius;
0.25 mm ID fiber
General
purpose
Compact threaded head;
25 mm bending radius;
0.25 mm ID fiber; coaxial
Heat
resistant
Resists 150°C; fiber sheath
material: fluororesin.
Operating ambient
temperature: -- 40_C to 150_C
(-- 40_F to 302_F);
35 mm bending radius;
1.5 mm ID fiber
M3 threaded head x
11 mm (0.43 in) L
2 m (6.56 ft) length
2 mm (0.08 in) dia.
x 15 mm (0.59 in)
tip; 29 mm (1.14
in) L overall
2 m (6.56 ft) length
General
purpose
Armored glass fiber-optic
cable can withstand temperatures to 150_C (302_F)
General
purpose
Armored glass fiber-optic
cable can withstand temperatures to 150_C (302_F)
M6 threaded head
2 m (6.56 ft) length
5/16--24 thread x
38.1 mm (1.5 in) L
0.91 m (3 ft) length
5/16--24 thread x
38.1 mm (1.5 in) L
1.83 m (6 ft) length
47
E32
E32
J E3A2-X AND E3S-X3 BLOCK STYLE AMPLIFIERS
The table specifies the sensing characteristics of each fiber when used with the following amplifiers:
A2X: E3A2-X Slim Amplifier with Plug-in Output
SX3: E3S-X3 Rugged Metal Body DC Amplifier
Through-beam Fiber-optic Cables
Application Features
General
purpose
General
purpose
Thin probe
General
purpose
Appearance
Type
Detection distance
Min. detectable
object (opaque)
Part number
A2X
120 mm
1.0 mm dia.
E32-TC200
120 mm
1.0 mm dia.
E32-TC200A
120 mm
1.0 mm dia.
E32-TC200B
Coiled cable ideal for
A2X
moving parts; 25 mm
M4 threaded head x
bending radius;
11 mm (0.43
(0 43 in) L
1 mm ID fiber
SX3
100 mm
1.0 mm dia.
E32-TC200C
Sensing head with
90 mm probe; spiral
coiled cable withstands repeated
stretching from
reciprocating
machine parts; 25
mm bending radius;
1 mm ID fiber
100 mm
1.0 mm dia.
E32-TC200D
35 mm
0.5 mm dia.
E32-TC200E
35 mm
0.5 mm dia.
E32-TC200F
Compact threaded
head; 25 mm
bending radius;
1 mm ID fiber
M3; possible to
mount the reflective
side view conversion
attachment
(E39-F5); 25 mm
bending radius;
1 mm ID fiber
Probe for spaceconfined sensing
areas; 25 mm
bending radius;
1 mm ID fiber
M4 threaded head x
14 mm (0.55 in) L
SX3
2 m (6.56 ft) length
A2X
M3 threaded head x
7 mm (0.28 in) L
2 m (6.56 ft) length
SX3
A2X
M4 threaded head
90 mm (3.54
(3 54 in)
probe length
SX3
2 m (6.56 ft) length
56.5 cm (1.85 ft) L;
2 m (6.56 ft)
extended
Thin probe
General
purpose
Thin probe
A2X
M4 threaded head
90 mm (3.54 in)
probe length
56.6 cm (1.85 ft);
2 m (6.56 ft)
extended
Thin fiber with small
easy-to-mount
head ; 25 mm
head.;
bending radius;
0.5 mm ID fiber
M3 threaded head x
11 mm (0.43
(0 43 in)
i )L
Sensing head with
90 mm probe;
25 mm bending
radius; 0.5 mm ID
fiber
M3 threaded head
90 mm (3.54
(3 54 in)
length probe
SX3
A2X
2 m (6.56 ft) length
SX3
A2X
SX3
2 m (6.56 ft) length
48
E32
E32
Diffuse Fiber-optic Cables for E3A2-X and E3S-X3 Amplifiers
Application Features
High
accuracy
positioning
General
purpose
Concentric beam:
emitter in the center
and a ring of 16
receivers in the 2.5
25
mm dia. tip; 25 mm
bending radius;
1 mm ID fiber
Compact threaded
head; 25 mm bending radius; 1 mm ID
fiber
Appearance
Type
Detection distance
Standard object
(see note)
A2X
50 mm
30 x 30 mm
E32-CC200
50 mm
30 x 30 mm
E32-DC200
50 mm
30 x 30 mm
15 mm
30 x 30 mm
15 mm
30 x 30 mm
12 mm
15 x 15 mm
12 mm
15 x 15 mm
Part number
M6 threaded head x
20 mm (0.79
(0 79 in) L
2 m (6.56 ft) length
SX3
A2X
M6 threaded head x
14 mm (0.55 in) L
SX3
2 m (6.56 ft) length
Thin probe
General
purpose
Probe for space-confined sensing
areas; 25 mm
bending radius;
1 mm ID fiber
A2X
M6 threaded head
90 mm (3.54
(3 54 in)
i )
probe length
Coiled cable ideal for
moving parts; 25 mm
bending radius;
M6 threaded head x
1 mm ID fiber
17 mm (0.67
(0 67 in) L
General
purpose
Thin probe
Sensing head with
90 mm probe; spiral
coiled cable withstands repeated
stretching from
reciprocating
machine parts; 25
mm bending radius;
1 mm ID fiber
Thin fiber with small
easy-to-mount
head ; 25 mm
head.;
bending radius;
0.5 mm ID fiber
Sensing head with
90 mm probe; 25
mm bending radius;
0.5 mm ID fiber
SX3
2 m (6.56 ft) length
64 cm (2.1 ft) L
coiled; 2 m (6.56 ft)
extended.
Thin probe
E32-DC200B
A2X
E32-DC200C
SX3
A2X
E32-DC200D
M6 threaded head
90 mm (3.54 in)
probe length
64 cm (2.1 ft) L
coiled; 2 m (6.56 ft)
extended
SX3
A2X
M3 threaded head x
11 mm (0.43 in) L
E32-DC200E
SX3
2 m (6.56 ft) length
A2X
M3 threaded head
90 mm (3.54
(3 54 in)
length probe
SX3
2 m (6.56 ft) length
Note: A standard object for the diffuse fiber-optic cables is a Kodak 90% reflectance white card.
49
E32-DC200F
E32
E32
Specifications
J THROUGH-BEAM FIBER-OPTIC CABLES
Part number
E32-T11
E32-T11L
Operating ambient
temperature
-- 40°C to 70°C (-- 40°F
t 158°F) with
to
ith no icing
i i
Operating relative
humidity
35% to 85% with no
condensation
d
ti
Permissible bending
radius
4 mm min.
Core
material
PMMA
Sheath material
Vinyl chloride
25 mm min.
Black polyethylene
E32-T11R
1 mm min.
Copolymer vinyl
chloride
E32-T12L
25 mm min.
Black polyethylene
E32-T17L
25 mm min.
Black polyethylene
E32-T21
4 mm min.
Vinyl chloride
E32-T21L
25 mm min.
Black polyethylene
E32-T21R
1 mm min.
Copolymer vinyl
chloride
E32-T22
25 mm min.
Black polyethylene
E32-T22L
25 mm min.
Black polyethylene
E32-TC50
E32-TC200
25 mm min.
Black polyethylene
E32-TC200A
25 mm min.
Black polyethylene
E32-TC200C
25 mm min.
Black polyethylene
E32-TC200E
25 mm min.
Black polyethylene
E32-TC500
E32-TC1000
25 mm min.
Black polyethylene
E32-UTAT1-3F
E32-UTAT1-6F
-- 40°C to 150°C (-- 40°F
to 302°F) with no icing
25 mm min.
Glass
SUS 303 head,
SUS 304 sheath
E32-UTBT1-3F
E32-UTBT1-6F
-- 40°C to 200°C (-- 40°F
to 392°F) with no icing
25 mm min.
Glass
SUS 303 head,
SUS 304 sheath
E32-T33-1
-- 40°C to 70°C (-- 40°F
to 158°F) with no icing
25 mm min.
PMMA
Black polyethylene,
stainless steel head
Enclosure
rating
IEC IP67
E32-TC200B
E32-TC200B4
25 mm min.
Black polyethylene
E32-TC200D
E32-TC200D4
25 mm min.
Black polyethylene
E32-TC200F
E32-TC200F4
25 mm min.
Black polyethylene
E32-T14
25 mm min.
Black polyethylene
E32-T14L
25 mm min.
Black polyethylene
E32-T16
25 mm min.
Black polyethylene
E32-T16P
10 mm min.
Vinyl chloride
IEC IP50
Black polyethylene
IEC IP67
E32-T24
25 mm min.
E32-T51*
-- 40°C to 150°C (-- 40°F
to 302°F) with no icing
35 mm min.
PMMA
Fluoride resin
E32-T61
-- 40°C to 300°C (-- 40°F
to 572°F) with no icing
25 mm min.
Glass
304 stainless steel
E32-G14
-- 40°C to 70°C (-- 40°F
t 158°F) with
to
ith no icing
i i
25 mm min.
PMMA
Black polyethylene
25 mm min.
Black polyethylene
-- 30°C to 70°C (-- 22°F
to 158°F) with no icing
40 mm min.
Teflon-covered
black polyethylene
E32-M21
E32-T12F
*When used continuously between -- 40°C and 130°C (-- 40°F and 266°F)
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
50
E32
E32
J THROUGH-BEAM FIBER-OPTIC CABLES (CONTINUED)
Part number
E32-T22S*
E32-T24S*
E32-T84S*
Operating ambient
temperature
-- 40°C to 70°C (-- 40°F
t 158°F) with
to
ith no icing
i i
Operating relative
humidity
35% to 85% with no
condensation
d
ti
-- 40°C to 200°C (-- 40°F
to 392°F) with no icing
Permissible bending
radius**
10 mm min.
Core
material
PMMA
Sheath material
25 mm min.
Glass
304 stainless steel
Permissible bending
radius
25 mm min.
Core
material
PMMA
Sheath material
Copolymer vinyl
chloride
hl id
Enclosure
rating
IEC IP67
*13 mm dia. beam size at a distance of 200 mm
**Average at 30% of sensing distance
J DIFFUSE FIBER-OPTIC CABLES*
Part number
E32-CC200
E32-D11
Operating ambient
temperature
-- 40°C to 70°C (-- 40°F
t 158°F) with
to
ith no icing
i i
Operating relative
humidity
35% to 85% with no
condensation
d
ti
Black polyethylene
4 mm min.
Vinyl chloride
E32-D11L
25 mm min.
Black polyethylene
E32-D11R
1 mm min.
Copolymer vinyl
chloride
E32-D21
4 mm min.
Vinyl chloride
E32-D21L
25 mm min.
Black polyethylene
E32-D21R
1 mm min.
Black polyethylene
E32-D22L
25 mm min.
Black polyethylene
E32-D32
E32-D32L
E32-DC50,
E32-DC200
E32-DC200C
E32-DC200E
E32-DC500,
E32-DC1000
E32-UDAT1-3F,
E32-UDAT1-6F
-- 40°C to 150°C (-- 40°F
to 302°F) with no icing
25 mm min.
Glass
SUS 303 head,
SUS 304 sheath
E32-UDBT1-3F,
E32-UDBT1-6F
-- 40°C to 200°C (-- 40°F
to 392°F) with no icing
25 mm min.
Glass
SUS 303 head,
SUS 304 sheath
E32-D33
-- 40°C to 70°C (-- 40°F
t 158°F) with
to
ith no icing
i i
25 mm min.
PMMA
Black polyethylene
E32-DC200B,
E32-DC200B4
E32-DC200D,
E32-DC200D4
E32-DC200F,
E32-DC200F4
E32-DC9G,
E32-DC9G4
12.5 mm min.
Stainless steel
E32-D14L
25 mm min.
Black polyethylene
25 mm min.
Black polyethylene
35 mm min.
Fluoride resin
E32-D24
E32-D51**
-- 40°C to 150°C (-- 40°F
to 302°F) with no icing
*Differential travel is 20% of max. detection distance. With E3X-H11 amplifier, this is adjustable between 0% and 20%.
**When used continuously between -- 40°C and 130°C (-- 40°F and 266°F)
51
Enclosure
rating
IEC IP67
E32
E32
J DIFFUSE FIBER-OPTIC CABLES (CONTINUED)*
Part number
E32-D61
Operating ambient
temperature
-- 40°C to 300°C (-- 40°F
to 572°F) with no icing
Operating relative
humidity
35% to 85% with no
condensation
Permissible bending
radius
25 mm min.
Core
material
Glass
Sheath material
304 stainless steel
Enclosure
rating
IEC IP67
25 mm min.
Glass
304 stainless steel
IEC IP67
40 mm min.
PMMA
Teflon-covered
black polyethylene
IEC IP67
E32-D73
-- 40°C to 400°C (-- 40°F
to 752°F) with no icing
E32-D12F
-- 30°C to 70°C (-- 22°F
to 158°F) with no icing
E32-L24L**
-- 40°C to 105°C (-- 40°F
to 221°F) with no icing
10 mm min. (average 10% decrease
in sensing distance)
PMMA
Reinforced polyethylene
IEC IP50
E32-L25
-- 40°C to 70°C (-- 40°F
t 158°F) with
to
ith no icing
i i
25 mm min.
PMMA
Black polyethylene
IEC IP50
25 mm min.
PMMA
Black polyethylene
IEC IP50
-- 40°C to 105°C (-- 40°F
to 221°F) with no icing
10 mm min. (average 10% decrease
in sensing distance)
PMMA
Reinforced polyethylene
IEC IP50
E32-L25A
E32-L25L**
35% to 85% with no
condensation
*Differential travel is 20% of max. detection distance. With E3X-H11 amplifier, this is adjustable between 0% and 20%.
**Beam size is 2 mm dia.
Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin.
J POLARIZED RETROREFLECTIVE FIBER-OPTIC CABLES
Part number
E32-R16 with
E39-R1 reflector
E32-R21 with
E39-R3 reflector
Operating ambient
temperature
-- 25°C to 55°C
(-- 13°F to 131°F) with
no icing
Operating relative
humidity
35% to 85%
Permissible bending
radius
25 mm min.
-- 40°C to 70°C
(-- 40°F to 158°F) with
no icing
Core
material
PMMA
Sheath material
Black polyethylene
Enclosure
rating
IEC IP66
IEC IP67
52
E32
E32
Engineering Data
J EXCESS GAIN RATIO
With standard sensing object. With standard target at maximum sensitivity.
E32-D21L with E3X-DAN
amplifier (Reflective)
Excess gain ratio
E32-DC200 with E3X-DAN
amplifier (Reflective)
Excess gain ratio
Excess gain ratio
E32-TC200 with E3X-DAN
amplifier (Through-beam)
Long distance
Long distance
Long distance
Operating
level
Operating
level
Operating
level
Standard
Standard
High speed
High speed
Distance (m)
High speed
Distance (mm)
Distance (mm)
Through-beam Type, General Purpose
E32-T11 with E3X-A11 amplifier
E32-T11 with E3JU-XR amplifier
100
100
50
5
1
Operating level
0
50
100 150 200 250 300 350 400
Excess gain ratio
Excess gain ratio
30
10
10
1
0.1
0
100
Sensing distance (mm)
200
Sensing distance (mm)
53
Standard
300
E32
E32
E32-T11L with E3X-A, E3X-F
and E3X-VG amplifiers
6
E32-T11L with E3X-H11 amplifier
Sensing distance
E32-T11L + E39-F1 with
E3X-H11 amplifier
Sensing distance
Sensing distance
4
3
E3X-Aj
2
Excess gain ratio
Excess gain ratio
Excess gain ratio
5
E3X-Fj
1
0
200
Operating level
400
600
800
1000
Sensing distance (mm)
E32-T11L with E39-F2 and
E3X-H11 amplifier
E32-T11L with E39-F3 and
E3X-H11 amplifier
Sensing distance
Excess gain ratio
Excess gain ratio
E32-T11L with E3X-NH amplifier
Sensing
object
Sensing distance
Sensing distance (mm)
Sensing distance (m)
Sensing distance (mm)
Sensing distance (mm)
54
Sensing distance
Excess gain ratio
E3X-VGj
Sensing distance (mm)
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam Type, General Purpose
E32-T11L with E39-F1
and E3X-NH amplifier
E32-T11R with E39-F2 and
E3X-NH amplifier
E32-T11L with E39-F3 and
E3X-NH amplifier
Sensing distance
Sensing distance
Target
Sensing distance (mm)
Sensing distance (mm)
E32-T11L with E3X-NVG amplifier
Excess gain ratio
Excess gain ratio
Excess gain ratio
Sensing distance
Sensing distance (mm)
Sensing distance
E32-T11R with E3X-NH amplifier
E32-T12L with E3X-A, E3X-F and
E3X-VG amplifiers
6
E3X-NVG
Sensing distance
5
Excess gain ratio
Detection distance
Excess gain ratio
Excess gain ratio
Sensing distance
W1E3X-NH
4
3
E3X-Aj
2
E3X-Fj
1
Operating level
E3X-VGj
Sensing distance (mm)
0
Sensing distance (mm)
E32-T17L with E3X-A, E3X-F
and E3X-VG amplifiers
E32-T17L with E3X-H11 amplifier
600
800
Sensing distance
E3X-Fj
E3X-VGj
Operating level
Sensing distance (m)
Sensing distance (m)
55
1000
E32-T17L with E3X-NH amplifier
Excess gain ratio
E3X-Aj
400
Sensing distance (mm)
Sensing distance
Excess gain ratio
Excess gain ratio
Sensing distance
200
Operating level
Sensing distance (m)
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam Type, General Purpose
E32-T21 with E3X-A amplifier
E32-T21 with E3JU-XR amplifier
10
5
1
Sensing distance
10
Excess gain ratio
30
Excess gain ratio
Excess gain ratio
E32-T21 with E3X-H amplifier
100
100
50
1
Operating level
0.1
0
20
40
60
80
100
0
50
25
75
100
Sensing distance (mm)
120
Sensing distance (mm)
Sensing distance (mm)
E32-T21L with E3X-A, E3X-F and
E3X-VG amplifiers
E32-T21L with E3X-NH amplifier
Excess gain ratio
Excess gain ratio
Excess gain ratio
Sensing distance
Sensing distance
Sensing distance
E3X-Aj
E32-T21R with E3X-NH amplifier
E3X-NH
E3X-Fj
E3X-VGj
Operating level
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (mm)
E32-T22 with E3X-A and
E3S-X3 amplifiers
E32-T22 with E3JU-XR amplifier
E32-T22L with E3X-A, E3X-F and
E3X-VG amplifiers
E3S-X3
Sensing distance
10
Excess gain ratio
E3X-A
Excess gain ratio
Excess gain ratio
100
1
Operating level
0.1
0
50
100
Sensing distance (mm)
Sensing distance (mm)
E3X-Aj
E3X-Fj
150
E3X-VGj
Operating level
Sensing distance (mm)
56
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam Type, General Purpose
Sensing distance (mm)
E32-TC200 with E3X-H11 amplifier
Operating level
Sensing distance
Excess gain ratio
Excess gain ratio
E32-TC200 with E3X-DA amplifier
E32-TC200 with E39-F1 and
E3X-H11 amplifier
Sensing distance
Operating level
Sensing distance (mm)
Sensing distance (m)
Excess gain ratio
Operating level
E32-TC200 with E39-F2 and
E3X-A amplifier
Excess gain ratio
E32-TC200 with E39-F1 and
E3X-A amplifier
Excess gain ratio
Excess gain ratio
E32-TC50/TC200/TC500/TC1000
with E3X-A11 amplifier
Long distance
Operating
level
High speed
Standard
Sensing distance (m)
Sensing distance (mm)
E32-TC200 with E3X-NM and
E3X-NT amplifiers
Sensing distance (m)
E32-TC200 with E3X-NH amplifier
E3X-NM
Sensing distance (mm)
Excess gain ratio
E3X-NT
Sensing distance
Sensing distance
Excess gain ratio
Excess gain ratio
Sensing distance
E32-TC200 with E39-F1 and
E3X-NH amplifier
Sensing distance (mm)
57
Sensing distance (m)
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam Type, General Purpose
E32-TC200 with E3X-NV amplifier
E32-TC200 with E3JU-XR amplifier
E32-TC200 with E3XA-CC4A
analog output amplifier
Vcc = 12 V
10
1
0.1
Sensing distance (mm)
Analog output (mA)
Detection distance
E3X-NV
Excess gain ratio
Excess gain ratio
100
Adjuster: MAX.
Adjuster: MID.
Adjuster: MIN.
0
200
400
600
Sensing distance (mm)
E32-TC200 with E3X-DA amplifier
in analog mode
E32-TC200A with E3X-A11 amplifier
Sensing distance (mm)
E32-TC200A with E3XA-CC4A analog
output amplifier
Analog output (mA)
Excess gain ratio
Monitor output (V)
Vcc = 12 V
Adjuster: MAX.
Adjuster: MID.
Operating level
Adjuster: MIN.
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (mm)
E32-TC200C with E3XA-CC4A
analog output amplifier
E32-TC200E with E3X-A11 amplifier
E32-TC200E with E3XA-CC4A
analog output amplifier
Vcc = 12 V
Adjuster: MAX.
Operating level
Analog output (mA)
Analog output (mA)
Excess gain ratio
Vcc = 12 V
Adjuster: MAX.
Sensing distance (mm)
Sensing distance (cm)
Sensing distance (cm)
58
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam, Armored Type
E32-UTAT1-3F with E3X-A11 amplifier
E32-UTAT1-3F with E3JU-XR amplifier
100
Excess gain ratio
30
10
5
1
Operating level
100
50
30
Excess gain ratio
100
50
Excess gain ratio
E32-UTAT1-6F with E3X-A11 amplifier
10
1
50
100
150 200
5
1
0.1
Operating level
0
0
10
250
200
400
600
Sensing distance (mm)
300 350
0
Sensing distance (mm)
E32-UTBT1-3F with E3JU-X amplifier
1
400
10
1
0.1
600
Sensing distance (mm)
Excess gain ratio
10
200
150 200
250
300 350
E32-UTBT1-6F with E3JU-X amplifier
100
Excess gain ratio
Excess gain ratio
100
0
100
Sensing distance (mm)
E32-UTAT1-6F with E3JU-XR amplifier
0.1
50
0
300
600
900
100
10
1
0.1
0
300
600
Sensing distance (mm)
Sensing distance (mm)
Through-beam, Probe Type
E32-TC200B/TC200B4 with
E3X-A11 amplifier
E32-TC200B with E3XA-CC4A
analog output amplifier
E32-TC200D with E3XA-CC4A
analog output amplifier
Vcc = 12 V
Adjuster: MAX.
Operating level
Adjuster: MAX.
Adjuster: MID.
Analog output (mA)
Analog output (mA)
Excess gain ratio
Vcc = 12 V
Adjuster: MIN.
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (cm)
59
900
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam, Probe Type
E32-TC200F/TC200F4 with
E3X-A11 amplifier
E32-TC200F with E3XA-CC4A
analog output amplifier
Operating level
Analog output (mA)
Excess gain ratio
Vcc = 12 V
Sensing distance (mm)
Sensing distance (cm)
Through-beam, Side Beam Type
E32-T14 with E3X-A11 amplifier
E32-T14L with E3X-A, E3X-F
and E3X-VG amplifiers
E32-T14L with E3X-H11 amplifier
E3X-Aj
Sensing distance
Excess gain ratio
Excess gain ratio
Excess gain ratio
Sensing distance
E3X-Fj
E3X-VGj
Sensing distance (mm)
Operating level
Sensing distance (mm)
60
Sensing distance (mm)
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam, Side Sensing Type
E32-T14L with E3X-NH amplifier
E32-T16 with E3X-A11 amplifier
E32-T16 with E3X-NH amplifier
Sensing distance
Excess gain ratio
Excess gain ratio
Excess gain ratio
Sensing distance
Operating level
20
Sensing distance (mm)
E32-T16 with E3X-H11 amplifier
Sensing distance (cm)
E32-T16 with E3XA-CC4A analog
output amplifier
40
60
Sensing distance (cm)
E32-T16 with slits and
E3XA-CC4A amplifier
Adjuster: MAX.
Adjuster: MID.
Analog output (mA)
Excess gain ratio
Analog output (mA)
Sensing distance
Slit width: 1 mm
Slit width: 0.5 mm
Adjuster: MIN.
Sensing distance (m)
Sensing distance (cm)
Excess gain ratio
E32-T24 with E3X-A11
and E3S-X3 amplifiers
E3X-A
E3S-X3
Operating level
Sensing distance (mm)
61
Sensing distance (cm)
80
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam, High Temperature Type
E32-T51 with E3X-A11 amplifier
E32-T51 with E3X-NH amplifier
8
Excess gain ratio
Excess gain ratio
7
Operating level
6
5
4
3
2
1
0
Sensing distance (mm)
150
250
200
Sensing distance (mm)
E32-T51 with E39-F1 and E3X-NH amplifier
E32-T51 with E3JU-XR amplifier
8
100
7
Excess gain ratio
Excess gain ratio
100
50
6
5
4
3
10
1
2
0.1
1
0
0
500
1000
1500
Sensing distance (mm)
E32-T61 with E3X-A and E3S-X3 amplifiers
Excess gain ratio
200
400
Sensing distance (mm)
2000
E3X-A
E3S-X3
Operating level
Sensing distance (mm)
62
600
300
E32
E32
J EXCESS GAIN RATIO (CONT.)
Through-beam, Special Purpose Type
Excess gain ratio
E32-T12F with E3X-A, E3X-F
and E3X-VG amplifiers
Excess gain ratio
E32-M21 with E3XA-CC4A
analog output amplifier
Analog output (mA)
E32-M21 with E3X-A11 amplifier
Adjuster: MAX.
Adjuster: MID.
Adjuster: MIN.
Sensing distance (mm)
Sensing distance (cm)
Sensing distance (cm)
E32-T22S with E3X-NH amplifier
E32-T24S with E3X-NH amplifier
Sensing distance
E32-T84S with E3X-NH amplifier
Sensing distance
Excess gain ratio
Excess gain ratio
Excess gain ratio
Sensing distance
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (mm)
Diffuse, General Purpose
E32-CC200 with E3XA-CC4A
analog output amplifier
Adjuster: MID.
100
30
Excess gain ratio
Adjuster: MAX.
E32-D11 with E3JU-XR amplifier
100
50
Vcc = 12 V
Excess gain ratio
Analog output (mA)
Sensing object:
3 x 3 cm white mat paper
E32-D11 with E3X-A11 amplifier
10
5
1
Operating level
1
0.1
0
Adjuster: MIN.
0
Sensing distance (cm)
10
10
20
30
40
50
Sensing distance (mm)
63
60
70
25
50
75
Sensing distance (mm)
100
E32
E32
J EXCESS GAIN RATIO (CONT.)
Diffuse, General Purpose
E32-D11L with E3X-H11 amplifier
E32-D11L with E3X-A, E3X-F and
E3X-VG amplifiers
6
Sensing distance
E32-D11L with E3X-NH amplifier
Sensing distance
Sensing distance
3
2
E3X-Aj
E3X-Fj
Sensing
object
Target
Excess gain ratio
Sensing object
4
Excess gain ratio
Excess gain ratio
5
1
Operating level
E3X-VGj
0
40
80
120
160
200
Sensing distance (mm)
Sensing distance (mm)
E32-D11L with E3X-NVG amplifier
Sensing distance (mm)
E32-D11L with E3X-H11 amplifier
E32-D11R with E3X-NH amplifier
Sensing distance
Excess gain ratio
Excess gain ratio
Detectable
object
E3X-NVG
Excess gain ratio
Sensing distance
Sensing
object
Sensing target
E3X-NH
Operating level
Sensing distance (mm)
Sensing distance (m)
Sensing distance (mm)
E32-D21 with E3X-A11 amplifier
E32-D21 with E3JU-XR amplifier
100
100
Sensing distance
30
10
5
1
Sensing object
Excess gain ratio
Excess gain ratio
50
Excess gain ratio
E32-D21L with E3X-A, E3X-F, and
E3X-VG amplifiers
10
1
E3X-Aj
E3X-Fj
0.1
Operating level
0
5
10
Sensing distance (mm)
0
2
4
6
8
10
12
14
15
E3X-VGj
Operating level
16
Sensing distance (mm)
Sensing distance (mm)
64
E32
E32
J EXCESS GAIN RATIO (CONT.)
Diffuse, General Purpose
E32-D21L with E3X-NA amplifier
Excess gain ratio
E32-D21L with E3X-DA amplifier
E32-D21R with E3X-NH amplifier
Sensing distance
Standard
High speed
Excess gain ratio
Target
Excess gain ratio
Long distance
Operating
level
Sensing distance
Sensing distance (mm)
Sensing target
Sensing distance (mm)
Sensing distance (mm)
E32-D21L with E3X-A, E3X-F
and E3X-V amplifiers
E32-D32 with E3X-A11 amplifier
100
E3X-F j
10
Operating level
1
0.1
0
Operating level
E32-DC200 with E3X-DA amplifier
E32-DC200 with E3X-A11 amplifier
Sensing distance
Excess gain ratio
Excess gain ratio
30
Sensing distance (mm)
Long distance
Operating
level
Operating level
20
Sensing distance (mm)
Sensing distance (mm)
E32-DC50/DC200/DC500/DC1000
with E3X-A11 amplifier
10
Excess gain ratio
E3X-VGj
Excess gain ratio
E3X-Aj
Excess gain ratio
Excess gain ratio
Sensing distance
Sensing object
E32-D32 with E3JU-XR amplifier
Standard
High speed
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (mm)
65
40
E32
E32
J EXCESS GAIN RATIO (CONT.)
Diffuse, General Purpose
E32-DC200 with E3X-NM and
E3X-NT amplifiers
E32-DC200 with E3X-NH amplifier
E32-DC200 with E3X-NV amplifier
Excess gain ratio
E32-DC200 with E3XA-CC4A analog
output amplifier
Vcc = 12 V
Analog output (mA)
Excess gain ratio
Sensing object:
3 x 3 cm white mat paper
10
1
0.1
150
200
Adjuster: MAX.
Adjuster: MID.
Adjuster: MIN.
Sensing distance (mm)
Sensing distance (mm)
Sensing distance (cm)
E32-DC200 with E3XA-CC4A analog
output amplifier
E32-DC200 with E3XA-CC4A analog
output amplifier
Vcc = 12 V
Adjuster: MAX.
Sensing object:
1.5 x 1.5 cm white mat paper
Vcc = 12 V
Adjuster: MAX.
Analog output (mA)
Analog output (mA)
Sensing object:
3 x 3 cm white mat paper
Sensing distance (cm)
E32-DC200 with E3X-DA amplifier in
analog mode
Monitor output (V)
100
100
Detectable
object
Sensing distance (mm)
E32-DC200 with E3JU-XR amplifier
50
E3X-NV
Sensing distance (mm)
Sensing distance (mm)
0
Sensing distance
Target
Excess gain ratio
Excess gain ratio
Sensing distance
Sensing distance (cm)
66
E32
E32
J EXCESS GAIN RATIO (CONT.)
Diffuse, Armored Type
E32-UDAT1-3F with E3X-A11 amplifier
E32-UDAT1-3F with E3JU-XR amplifier
100
50
100
30
10
5
30
Excess gain ratio
Excess gain ratio
100
50
Excess gain ratio
E32-UDAT1-6F with E3X-A11 amplifier
10
1
1
0
50
100
150 200
5
1
0.1
Operating level
0
10
250
50
100
150
Operating level
200
Sensing distance (mm)
300 350
0
50
Sensing distance (mm)
E32-UDAT1-6F with E3X-A11 amplifier
E32-UDBT1-3F with E3JU-X amplifier
1
150
10
1
0.1
0
0.1
100
250
300 350
100
Excess gain ratio
10
50
150 200
E32-UDBT1-6F with E3JU-X amplifier
100
Excess gain ratio
Excess gain ratio
100
0
100
Sensing distance (mm)
200
Sensing distance (mm)
50
100
150
10
1
0.1
200
0
Sensing distance (mm)
50
100
150
200
Sensing distance (mm)
Diffuse, Probe Type
E32-DC200B/B4 with E3XA-CC4A
analog amplifier
Excess gain ratio
Analog output (mA)
Sensing object:
3 x 3 cm white mat paper
Operating level
E32-DC200D/D4 with E3XA-CC4A
analog amplifier
Vcc = 12 V
Adjuster: MAX.
Adjuster: MID.
w/E3X-A
Sensing object:
3 x 3 cm white mat paper
Vcc = 12 V
Adjuster: MAX.
Analog output (mA)
E32-D33 with E3X-A11 amplifier
Adjuster: MIN.
Sensing distance (mm)
Sensing distance (cm)
67
Sensing distance (cm)
E32
E32
J EXCESS GAIN RATIO (CONT.)
Diffuse, Probe Type
E32-DC200F/F4 with E3XA-CC4A analog amplifier
E32-DC9G/E32-DC9G4 with E3X-A11 amplifier
Sensing object:
1.5 x 1.5 cm white mat paper
Excess gain ratio
Analog output (mA)
Vcc = 12 V
Adjuster: MAX.
Operating level
Sensing distance (cm)
Sensing distance (mm)
Diffuse, Side Sensing Type
E32-D14L with E3X-AE3X-F and E3X-VG amplifiers
Sensing distance
5
Excess gain ratio
Excess gain ratio
6
E32-D24 with E3X-A11 amplifier
4
3
E3X-Aj
2
Operating level
E3X-Fj
1
E3X-VGj
0
40
80
120
160
200
Sensing distance (mm)
Sensing distance (mm)
Diffuse, High Temperature Type
E32-D51 with E3X-A11 amplifier
E32-D51 with E3JU-XR amplifier
Excess gain ratio
Excess gain ratio
100
10
1
Operating level
0.1
0
50
100
150
Sensing distance (mm)
Sensing distance (mm)
68
200
E32
E32
J EXCESS GAIN RATIO (CONT.)
E32-D61 with E3X-A11 amplifier
E32-D73 with E3X-A11 amplifier
Excess gain ratio
Excess gain ratio
Diffuse, High Temperature Type
E3X-A
Operating level
Operating level
Sensing distance (mm)
Sensing distance (mm)
Diffuse, Special Purpose Type
E32-D12F with E3X-A, E3X-F and
E3X-VG amplifiers
6
Sensing distance
5
Sensing object
Excess gain ratio
Excess gain ratio
E32-L25, E32-L25A with E3X-A11 amplifier
4
3
E3X-Aj
2
E3X-Fj
1
E3X-VGj
0
40
Operating level
Operating level
80
120
160
200
Sensing distance (mm)
Sensing distance (mm)
Retroreflective Type
E32-R21 with E3X-A11 amplifier
E32-R16 with E3X-A11 amplifier
E32-R21 with E3XA-CC4A analog
output amplifier
Excess gain ratio
Excess gain ratio
Analog output (mA)
Vcc = 12 V
Adjuster: MAX.
0.1
Sensing distance (mm)
Sensing distance (mm)
69
0
1
2
3
Sensing distance (m)
4
E32
E32
J PARALLEL OPERATING RANGE (TYPICAL)
E32-TC200 with E3X-DAN
amplifier (Through-beam)
E32-T11R with E3X-DAN
amplifier (Through-beam)
E32-T11 with E3X-DAN
amplifier (Through-beam)
Distance Y (mm)
Distance Y (mm)
Distance Y (mm)
At max. sensitivity. (Use for optical axis adjustment at installation.)
Long distance
Standard
High speed
High speed
High speed
Standard
Standard
Long distance
Long distance
Distance X (m)
Distance X (m)
Distance X (m)
J OPERATING RANGE (TYPICAL)
E32-D33 with E3X-DAN
amplifier (Reflective)
Distance Y (mm)
Long distance
Standard
High speed
E32-L25L with E3X-DAN
amplifier (Convergent Reflective)
Distance Y (mm)
E32-DC200 with E3X-DAN
amplifier (Reflective)
Distance Y (mm)
With standard sensing object at max. sensitivity. (Use for the positioning of the object and Sensor.)
Standard
High speed
Long distance
Distance X (mm)
Distance X (mm)
Distance X (mm)
J PARALLEL OPERATING RANGE (TYPICAL) MARK DETECTION SENSOR E3X-DAB11-N
E32-TC200 with E3X-DAN
amplifier (Through-beam)
E32-TC200+E39-F1 with E3X-DAN
amplifier (Through-beam)
Distance Y (mm)
Distance Y (mm)
At max. sensitivity. (Use for optical axis adjustment at installation.)
Long distance
Standard
High speed
High
speed
Distance X (m)
Standard Long
distance
Distance X (m)
70
E32
E32
J OPERATING RANGE (TYPICAL)
High speed
E32-CC200 with E3X-DAN
amplifier (Reflective)
E32-D11L with E3X-DAN
amplifier (Convergent Reflective)
Distance Y (mm)
Distance Y (mm)
E32-DC200 with E3X-DAN
amplifier (Reflective)
Distance Y (mm)
With standard sensing object at max. sensitivity. (Use for the positioning of the object and Sensor.)
Long
distance
High speed
Standard
Long distance
High speed
Standard
Standard
Long distance
Distance X (mm)
Distance X (mm)
Distance X (mm)
J OPERATING RANGE
Through-beam, General Purpose Type
E32-TC200 (Through-beam)
Standard
High speed
High speed
Standard
Long distance
Sensing distance X (mm)
Distance X (m)
E32-T11 with E3X-NH amplifier
60
40
20
0
-20
-40
-60
0
100
200
300
Parallel operating range Y (mm)
E32-T11 with E3JU-XR amplifier
Parallel operating range Y (mm)
Distance Y (mm)
Long
distance
E32-T11R (Through-beam)
Distance Y (mm)
Parallel operating range Y (mm)
E32-T11 with E3X-DAN amplifier
Sensing distance X (mm)
Sensing distance (mm)
71
High speed
Standard
Long distance
Distance X (m)
E32
E32
E3X-Aj
E3X-Fj
Sensing distance X (mm)
Parallel operating range Y (mm)
E32-T11L with E39-F2 and E3X-A,
E3X-F and E3X-VG amplifiers
E3X-VGj
E3X-Aj
E3X-Fj
Parallel operating range Y (mm)
E3X-VGj
E32-T11L with E39-F1 and E3X-A,
E3X-F, and E3X-VG amplifiers
E3X-Aj
E3X-VGj
E3X-Fj
Sensing distance X (mm)
E32-T11L with E39-F3 and E3X-A
and E3X-F amplifiers
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T11L with E3X-A, E3X-F,
and E3X-VG amplifiers
4
E3X-Aj
3
2
1
E3X-Fj
0
1
2
3
4
Sensing distance X (mm)
E32-T11L with E3X-H11 amplifier
E32-T11L with E39-F1 and E3X-H11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Sensing distance X (mm)
Sensing distance X (mm)
72
Sensing distance X (mm)
X
Y
E32
E32
J OPERATING RANGE (CONT.)
Through-beam, General Purpose Type
Sensing distance X (m)
Sensing distance X (mm)
E32-T11L with E39-F2 and
E3X-NH amplifier
E32-T11L with E39-F3 and
E3X-NH amplifier
Sensing distance X (mm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T11L with E39-F1 and
E3X-NH amplifier
Parallel operating range Y (mm)
E32-T11L with E3X-NH amplifier
Sensing distance X (mm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T11L with E39-F2 and E3X-H11 amplifier
Target
Sensing distance X (mm)
E32-T11L with E3X-NVG amplifier
Sensing distance X (mm)
Sensing distance X (mm)
E32-T11R with E3X-DAN amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T11R with E3X-NH amplifier
73
High speed
Standard
Long distance
Sensing distance X (m)
E32
E32
J OPERATING RANGE (CONT.)
Through-beam, general purpose type
E3X-VGj
E32-T12L with E3X-NVG amplifier
E3X-Aj
E3X-Fj
Sensing distance X (mm)
E32-T17L with E3X-A, E3X-F and E3X-VG amplifiers
E32-T17L with E3X-H11 amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T12L with E3X-A, E3X-F, and E3X-VG amplifiers
E3X-Aj
E3X-VGj
E3X-Fj
Sensing distance X (m)
E32-T21 with E3JU-XR amplifier
Parallel operating range Y (cm)
10
5
0
-5
-10
-15
0
Parallel operating range Y (mm)
E32-T21L with E3X-A, E3X-F, and E3X-VG amplifiers
E3X-Fj
20
40
60
80
Sensing distance X (mm)
Sensing distance (mm)
E32-T21L with E3X-H11 amplifier
Parallel operating range Y (mm)
Sensing distance X (m)
E32-T21 with E3X-NH amplifier
15
Parallel operating range Y (mm)
E32-T17L with E3X-NH amplifier
Parallel operating range Y (cm)
Sensing distance X (mm)
E3X-Aj
Sensing distance X (mm)
Sensing distance X (mm)
74
E32
E32
J OPERATING RANGE (CONT.)
E32-T21L with E3X-NH amplifier
E32-T21R with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Through-beam, General Purpose Type
Sensing distance X (mm)
E3X-Fj
E32-T22 with E3JU-XR amplifier
Parallel operating range Y (mm)
E3X-Aj
Parallel operating range Y (mm)
E3X-VGj
E32-T22 with E3X-NH amplifier
Sensing distance X (mm)
30
20
10
0
-10
-20
-30
0
E32-TC50 with E3X-A11 amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
E32-T22L with E3X-A, E3X-F, and E3X-VG amplifiers
E3X-Aj
E3X-VGj
E3X-Fj
E3X-Aj
E3X-VGj
E3X-Fj
E32-TC200 with E3X-A11 amplifier
E32-TC200 with E3X-DAN amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
Parallel operating range Y (mm)
Sensing distance X (mm)
E3X-Aj
E3X-VGj
E3X-Fj
Sensing distance X (mm)
75
40
80
Sensing distance (mm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T22 with E3X-A, E3X-F, and
E3X-VG amplifiers
Sensing distance X (mm)
High speed
Standard
Long distance
Sensing distance X (m)
120
E32
E32
J OPERATING RANGE (CONT.)
E32-TC200 with E3X-H11 amplifier
E32-TC200 with E3X-NM and E3X-NT amplifiers
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Through-beam, General Purpose Type
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance X (mm)
E32-TC200 with E3JU-XR amplifier
Sensing distance X (mm)
Parallel operating range Y (mm)
E32-TC200 with E39-F2 and
E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-TC200 with E3X-NH amplifier
80
60
40
20
0
-20
-40
-60
-80
0
100
200
300
E32-TC200 with E3X-NV amplifier
E32-TC200A with E3X-A, E3X-F, and E3X-VG amplifiers
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Sensing distance (mm)
E3X-NV
E3X-Aj
E3X-VGj
E3X-Fj
Sensing distance X (mm)
Sensing distance X (mm)
76
400
E32
E32
J OPERATING RANGE (CONT.)
E32-TC200C with E3X-A11 amplifier
E32-TC200E with E3X-A, E3X-F and E3X-VG amplifiers
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Through-beam, General Purpose Type
80
60
40
20
0
50
100
150
200
20
40
60
80
Sensing distance (mm)
250
E3X-VGj
E3X-Aj
E3X-Fj
Sensing distance X (mm)
Through-beam, Armored Type
E32-UTAT1-6F with E3JU-XR amplifier
120
80
40
0
-40
-80
-120
0
120
240
360
480
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-UTAT1-3F with E3JU-XR amplifier
120
80
40
0
-40
-80
-120
0
100
Sensing distance (mm)
40
0
-40
-80
-120
600
800
Parallel operating range Y (mm)
Parallel operating range Y (mm)
80
400
400
E32-UTBT1-6F with E3JU-X amplifier
120
200
300
Sensing distance (mm)
E32-UTBT1-3F with E3JU-X amplifier
0
200
120
80
40
0
-40
-80
-120
0
200
400
600
Sensing distance (mm)
Sensing distance (mm)
77
800
E32
E32
J OPERATING RANGE (CONT.)
E32-TC200B and E32-TC200B4 with E3X-A11 amplifier
E32-TC200D and E32-TC200D4 with E3X-A11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Through-beam, Probe Type
E3X-Aj
E3X-VGj
E3X-Fj
Sensing distance X (mm)
80
60
40
20
0
50
100
150
40
60
80
Sensing distance (mm)
Parallel operating range Y (mm)
E32-TC200F and E32-TC200F4 with E3X-A11 amplifier
E3X-VGj
E3X-Aj
E3X-Fj
Sensing distance X (mm)
Through-beam, Side Beam Type
Parallel operating range Y (mm)
E32-T14
E32-T14 with E3X-NH amplifier
Parallel operating range Y (mm)
E32-T14 with E3X-A11 amplifier
Sensing distance X (mm)
E32-T14L with E3X-A11, E3X-F, and E3X-VG amplifiers
E32-T14L with E3X-H11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Sensing distance (mm)
E3X-VGj
E3X-Aj
E3X-Fj
Sensing distance X (mm)
Sensing distance X (mm)
78
200
20
250
E32
E32
J OPERATING RANGE (CONT.)
Through-beam, Side Beam Type
E32-T16 with E3XA-CC4A amplifier
and 0.5 mm slit
Parallel operating range Y (mm)
Sensing distance X (mm)
E32-T16 with E3X-A11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T14L with E3X-NH amplifier
4 mA
12 mA
Sensing distance (cm)
Sensing distance (mm)
12 mA
Sensing distance X (mm)
E32-T24 with E3X-NH amplifier
Parallel operating range Y (mm)
4 mA
E32-T24 with E3X-A11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T16 with E3XA-CC4A amplifier
and 1 mm slit
Sensing distance X (mm)
Sensing distance (mm)
E32-T51 with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Through-beam, High Temperature Type
E32-T51 with E3X-A and E3X-F amplifiers
Sensing distance X (mm)
79
Sensing distance X (mm)
E32
E32
J OPERATING RANGE (CONT.)
Through-beam, High Temperature Type
100
50
0
-50
-100
0
200
400
Sensing distance (mm)
600
E32-T61 with E3X-NH amplifier
Parallel operating range Y (mm)
E32-T61 with E3X-H11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T51 with E3JU-XR amplifier
Sensing distance X (mm)
Sensing distance X (mm)
Through-beam, Special Purpose Type
Parallel operating range Y (mm)
E32-T12F with E3X-NH amplifier
Parallel operating range Y (cm)
E32-M21 with E3X-NH amplifier
Parallel operating range Y (mm)
E32-M21 with E3X-A11 amplifier
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance (mm)
E32-T12F with E3X-H11 amplifier
Sensing distance X (mm)
Sensing distance X (mm)
E32-T24S with E3X-NH amplifier
Sensing distance X (mm)
80
E32-T84S with E3X-NH amplifier
Parallel operating range Y (mm)
E32-T22S with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Sensing distance X (cm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-T12F with E3X-A, E3X-F, and E3X-VG amplifiers
Sensing distance X (mm)
E32
E32
J OPERATING RANGE (CONT.)
E32-CC200 with E3X-A and E3X-F amplifiers
E32-CC200 with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Diffuse, General Purpose Type
E3X-Fj
Sensing distance X (mm)
Sensing target: Blue/Green
38 x 38 mm
Sensing distance X (mm)
E32-D11 with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-CC200 with E3MC-Y amplifier
Target
E32-D11 with E3JU-XR amplifier
Target
Sensing distance X (mm)
Parallel operating range Y (mm)
E3X-Aj
E3X-VGj
30
20
10
0
-10
-20
-30
0
25
50
Sensing distance X (mm)
E3X-VGj
E3X-Aj
E3X-Fj
Sensing object
Sensing object
E32-D11L with E3X-NH amplifier
E32-D11L with E3X-NVG amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
Parallel operating range Y (mm)
Sensing distance X (mm)
E32-D11L with E3X-H11 amplifier
Parallel operating range Y (mm)
E32-D11L with E3X-A, E3X-F, and E3X-VG amplifiers
Parallel operating range Y (mm)
75
Sensing distance (mm)
Target
Sensing distance X (mm)
Detectable
object
E3X-NVG
Sensing distance X (mm)
81
100
E32
E32
J OPERATING RANGE (CONT.)
Diffuse, General Purpose Type
E32-D11R with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
Sensing target: Blue/Green 38 x 38 mm
E32-D21 with E3X-A, E3X-F and
E3X-VG amplifiers
Parallel operating range Y (mm)
E32-D11L with E3MC-Y amplifier
Sensing distance X (mm)
E3X-VGj
E3X-Aj
E3X-Fj
Sensing object
Sensing distance X (mm)
Sensing distance X (mm)
Sensing object
Sensing distance X (mm)
Parallel operating range Y (mm)
E32-D22L with E3X-A and E3X-F amplifiers
E3X-Fj
E3X-Aj
Sensing object
1
0
-1
-2
-3
0
5
10
15
Sensing distance (mm)
Parallel operating range Y (mm)
2
E3X-Fj
E3X-Aj
Sensing object
Sensing distance X (mm)
E32-D21R with E3X-DAN amplifier
E32-D21L with E3X-NH amplifier
Target
Sensing distance X (mm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D21L with E3X-H11 amplifier
E32-D21L with E3X-A and E3X-F amplifiers
3
Sensing distance X (mm)
E32-D32 with E3X-A11 amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
Parallel operating range Y (mm)
Target
E32-D21 with E3JU-XR amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D21 with E3X-NH amplifier
Sensing distance X (mm)
82
8
6
4
2
0
10
20
30
40
50
2
4
6
8
Sensing distance X (mm)
60
70
E32
E32
J OPERATING RANGE (CONT.)
Diffuse, General Purpose Type
6
3
0
-3
-6
-9
0
10
20
30
Sensing distance (mm)
E32-D32L with E3MC-Y amplifier
Sensing target: Blue/Green 38 x 38 mm
Target
Sensing distance X (mm)
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D32L with E3X-NH amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
E32-D32L with E3X-A, E3X-F, and
E3X-VG amplifiers
9
E3X-VGj Amplifier
E3X-Fj
Amplifier
E3X-Aj Amplifier
Sensing distance X (mm)
E32-DC50 with E3X-A, E3X-F, and
E3X-VG amplifiers
Parallel operating range Y (mm)
Target
E32-D32 with E3JU-XR amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D32 with E3X-NH amplifier
E3X-Aj
E3X-VGj
E3X-Fj
Sensing distance X (mm)
Sensing distance X (mm)
E3X-Aj
E3X-Fj
Sensing distance X (mm)
Long
distance
High speed
Standard
Sensing distance X (mm)
Sensing object
Sensing distance X (mm)
E32-DC200 with E3X-NH amplifier
Target
Sensing distance X (mm)
E32-DC200 with E3JU-XR amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-DC200 with E3X-DAN amplifier
E32-DC200 with E3X-H11 amplifier
Parallel operating range Y (mm)
E3X-VGj
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-DC200 with E3X-A, E3X-F, and E3X-VG amplifier
30
20
10
0
-10
-20
-30
0
40
80
Sensing distance (mm)
83
120
E32
E32
J OPERATING RANGE (CONT.)
Diffuse, General Purpose Type
E32-DC200 with E3X-NV amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-DC200 with E3X-NM and E3X-NT amplifiers
E3X-NV
Sensing distance X (mm)
Sensing distance X (mm)
E32-DC200 with E3MC-Y amplifier
E32-DC200C with E3X-A11 amplifier
Parallel operating range Y (mm)
Parallel operating range Y [mm (inch)]
Sensing target: Blue/Green 38 x 38 mm
3.0
(0.118)
Parallel offset Y
2.0
(0.079)
1.0
(0.039)
Detecting distance X
0
1.0
(0.039)
Detectable
object
2.0
(0.079)
3.0
(0.118)
8
(0.316)
Sensing distance X (mm)
16
(0.630)
24
(0.945)
Detecting distance X [mm (inch)] with 5 x 5 cm
(2 x 2 in) 90% reflective mat paper
Parallel operating range Y (mm)
E32-DC200E with E3X-A11 amplifier
E3X-Aj
Sensing object
Sensing distance X (mm)
Diffuse, Armored Type
E32-UDAT1-6F with E3JU-XR amplifier
20
10
0
-10
-20
0
50
100
Sensing distance (mm)
150
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-UDAT1-3F with E3JU-XR amplifier
84
20
10
0
-10
-20
0
50
100
Sensing distance (mm)
150
E32
E32
J OPERATING RANGE (CONT.)
Diffuse, Armored Type
E32-UDAT1-3F and E32-UDAT1-6F with E3X-A11 amplifier
Parallel operating range Y (mm)
20
15
E32-UDAT1-3F
10
5
0
30
60
5
120
90
E32-UDAT1-6F
10
52
20
Sensing distance X (mm)
E32-UDBT1-6F with E3JU-X amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-UDBT1-3F with E3JU-X amplifier
12
8
4
0
-4
-8
-12
0
50
100
150
12
8
4
0
-4
-8
-12
0
25
50
75
100
125
Sensing distance (mm)
Sensing distance X (mm)
Diffuse, Probe Type
Parallel operating range Y (mm)
E32-DC200B and E32-DC200B4
with E3X-A and E3X-F amplifiers
E3X-Aj
E3X-Fj
Sensing object
Sensing distance X (mm)
Standard
Long distance
Sensing distance X (mm)
Parallel operating range Y (mm)
High speed
E32-D33 with E3X-NH amplifier
E32-DC200F with E3X-NH amplifier
Target
Sensing distance X (mm)
85
Target
Sensing distance X (mm)
E32-DC200F and E32-DC200F4 with
E3X-A11 amplifier
Parallel operating range Y (mm)
Sensing distance X (mm)
Parallel operating range Y (mm)
E3X-Aj
E32-D33 with E3X-DAN amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D33 with E3X-A11 amplifier
E3X-Aj
Sensing object
Sensing distance X (mm)
E32
E32
J OPERATING RANGE (CONT.)
Diffuse, Side Beam Type
E32-D24 with E3X-A and E3X-F amplifiers
X
E3X-Aj
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D14L with E3X-A, E3X-F and E3X-VG amplifiers
Y
E3X-Fj
E3X-VGj
Sensing distance X (mm)
E3X-Fj
E3X-Aj
Sensing distance X (mm)
Diffuse, High Temperature Type
Sensing object
Sensing distance X (mm)
Parallel operating range Y (mm)
E32-D61 with E3X-A and E3X-F amplifiers
E3X-Fj
E3X-Aj
Sensing
object
Sensing distance X (mm)
E32-D51 with E3JU-XR amplifier
Target
Sensing distance X (mm)
Parallel operating range Y (mm)
E3X-Aj
30
20
10
0
-10
-20
-30
0
50
86
E3X-Fj
100
Sensing distance (mm)
E32-D73 with E3X-A and E3X-F amplifiers
Parallel operating range Y (mm)
E3X-Fj
E32-D51 with E3X-NH amplifier
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D51 with E3X-A and E3X-F amplifiers
E3X-Aj
Sensing object
Sensing distance X (mm)
150
E32
E32
J OPERATING RANGE (CONT.)
Diffuse, Convergent and Special Purpose Types
E3X-Aj
X
12
Y
E3X-VGj
E3X-Fj
4
0
20
40
60
80
100
4
8
12
16
Sensing distance X (mm)
Operating
Sensing object
position Y
Sensing object Set distance X
Set distance X
Sensing distance X (mm)
Sensing distance (mm)
E32-L25L with E3X-DAN amplifier
Sensing distance X (mm)
E32-L25L with E3X-NH amplifier
Parallel operating range Y (mm)
8
E32-L25L with E3X-A amplifier
Parallel operating range Y (mm)
E32-L25 and E32-L25A with E3X-A11 amplifier
Parallel operating range Y (mm)
16
Parallel operating range Y (mm)
Parallel operating range Y (mm)
E32-D12F with E3X-A, E3X-F and E3X-VG amplifiers
Operating
position Y
Target
Target
Set distance X
Set distance X
Sensing distance X (mm)
Retroreflective Type
E32-R21 with E3X-A11 amplifiers
E32-R21 with E3XA-CC4A amplifier and E39-R3 reflector
Light interrupting
characteristics
D = 20 cm
Sensing objectposition
10 At 5 cm away from
reflector
At center
between sensor
and reflector
Fiber
head
5
D
Reflector
Sensing object
Moving distance of sensing object ℓ (mm)
87
Analog output (mA)
Analog output (mA)
Parallel operating range Y (mm)
Sensing distance (mm)
At 5 cm away
from sensor
Light interrupting
characteristics
D = 20 cm
Sensing objectposition
10 At 5 cm away from
reflector
At center between
sensor and reflector
At 5 cm away
from sensor
Output current (mA)
Output current (mA)
Fiber
head
5
D
Reflector
Sensing object
Moving distance of sensing object ℓ (mm)
E32
E32
J ANALOG OUTPUT VS. DISTANCE (STANDARD MODE)
E32-DC200 with E3X-DAN
amplifier (Diffuse)
Analog output (V)
Analog output (V)
E32-TC200 with E3X-DAN
amplifier (Through-beam)
Distance (mm)
Distance (mm)
J ADDITIONAL DATA
With standard sensing object. With standard target at maximum sensitivity.
0.1-dia.
copper
wire
Repeat Accuracy vs.
Sensing Distance
E32-DC200 with E3X-DAN
amplifier (Reflective)
Sensing object: White paper
(µm)
Distance Differential travel
Repeat accuracy
0.02-dia.
copper
wire
Differential Travel vs.
Sensing Distance
E32-D11L with E3X-DAN
amplifier (Reflective)
Differential travel (mm)
Distance Y (mm)
Sensing Distance vs.
Operating Range
E32-DC200 with E3X-DAN
amplifier (Reflective)
Standard
High
speed
Long
distance
0.4-dia.
copper wire
Distance X (mm)
Distance (mm)
88
Sensing object: White paper
High
speed
Standard
Long
distance
Distance (mm)
E32
E32
Dimensions
Unit: mm (inch)
J THROUGH-BEAM TYPE
(Sold in pairs)
General Purpose
E32-T11
Sensing head
(nickel-plated
Sixteen, brass)
Two hexagon clamping nuts
0.265
M4 x 0.7
Two toothed washers
(0.01) dia.
Optical fiber, 2.2 (0.086) dia.
Protective tube
M2.6 x
0.45
3.2
2.4
3.3
7
(0.28)
15
14
(0.55)
2 m (6.56 ft.)
E32-T11L
1.4
(0.06) dia.
3.2
7
(0.28)
Two hexagon clamping nuts (T = 2.4)
Two toothed washers (for M4)
Sensing head
Optical fiber, 2.2 (0.086) dia.
(nickel-plated brass) M4x0.7
M2.6 x
0.45
3
(0.12)
11
2 m (6.56 ft.)
14
(0.55)
E32-T11R
Two, hexagon nuts
Two, toothed washers
4mm sensing head (See Note.)
151-0.075 dia.
2.2-dia. optical fiber
Note: The sensing head is made of nickel-plated brass.
E32-T12L
1.4
dia.
2.4 dia.
(0.09) Sensing head
(nickel-plated brass) 3 dia.
3
Optical fiber, 2.2 (0.086) dia.
11
2 m (6.56 ft.)
14
(0.55)
E32-T17L
Sensing head
(ABS) M14 x 1
Two hexagon clamping nuts
10-mm dia.
lens (PMMA)
19
(0.75)
Optical fiber,
2.2 (0.086) dia.
5
23
42
10 m (32.8 ft.)
89
E32
E32
J THROUGH-BEAM TYPE (CONT.)
E32-T21
Sensing head (nickel-plated brass) M3 x 0.5
Two hexagon clamping nuts
Two toothed washers
Protective tube
Optical fiber, 1 dia.
Four, 0.25
(0.01) dia.
2.5
Fiber attachment
(E39-F9)
10
15
1.8
11
(0.43)
5.5
(0.22)
25 (0.99)
2 m (6.56 ft.)
E32-T21L
Two hexagon clamping nuts
Two toothed washers
Sensing head M3 x 0.5
(nickel-plated brass)
Optical fiber, 1 dia.
0.9
(0.04) dia.
1.7
(0.07)
2.5
5.5
(0.22)
E32-T21R
151-0.037 dia.
Fiber attachment
(E39-F9)
25 (0.99)
10
1.8
11
(0.04)
2 m (6.56 ft.)
Two, hexagon nuts
Two, toothed washers
3mm sensing head (See Note.)
3 dia.
2.2-dia. optical fiber
Note: The sensing head is made of nickel-plated brass.
E32-T22
0.5 dia.
Sensing head
1.4 dia.
SUS303
17
22 (0.86)
2
(0.08) dia.
Heat-shrinkabletubing
25 (0.99)
Optical fiber,
1 dia.
10
Fiber attachment
(E39-F9)
12
2 m (6.56 ft.)
E32-T22L
0.9 dia.
1.8
(0.07) dia.
2
(0.07)
Sensing head, 2 dia. (stainless)
Heat-shrinkable tubing
Optical fiber, 1.0 dia.
17
22
(0.86)
Fiber attachment
(E39-F9)
25 (0.99)
10
12
2 m (6.56 ft.)
90
E32
E32
J THROUGH-BEAM TYPE (CONT.)
E32-TC50, E32-TC200, E32-TC500,
E32-TC1000
1.0
(0.04) dia.
Two hexagon clamping nuts
Two toothed washers
Sensing head M4 x 0.7
(nickel-plated brass)
M2.6 x 0.45
2.4
3
3.2
14
(0.55)
7
(0.28)
Optical fiber, 2.2 dia.
* 2 m (6.56 ft.)
* This length is 50 cm for E32-TC50, 5 m for E32-TC500 and 10 m for E32-TC10000.
E32-TC200A
1.0
(0.04) dia.
5.5
(0.22)
Two hexagon clamping nuts
Two toothed washers
Sensing head M3 x 0.5 (nickel-plated brass)
2.6 dia.
1.8
7
(0.28) 14
(0.55)
1.5
3 dia.
Optical fiber, 2.2 dia.
2 m (6.56 ft.)
E32-TC200C
Two hexagon clamping nuts
1.0
(0.04) dia. Sensing head
M2.6 x 0.45
3
(0.12)
22
(0.87) dia.
Optical fiber,
2.2 dia.
2.4
7
(0.28)
75 (3.0)
Two toothed washers
M4x0.7 (nickelplated brass)
11
(0.43)
400
(15.8)
2 m (6.56 ft.)
when straight
90
(3.54)
E32-TC200E
Two hexagon clamping nuts
Two toothed washers
0.5
(0.02) dia.
2.5
(0.10)
5.5
(0.22)
Sensing head M3 x 0.5
(nickel-plated brass)
Optical fiber, 1 dia.
25 (0.99)
Fiber attachment
(E39-F9)
10
1.8
11
(0.43)
2 m (6.56 ft.)
Armored Type
E32-UTAT1-3F
E32-UTAT1-6F
12.7 (0.5)
Ø1.27 (0.05)
(Fiber Bundle)
(5/16 - 24) thread
(303 stainless steel)
5.1 (0.2)
(304 stainless steel)
38.1 (1.5)
50.8 (2)
(ABS)
(303 stainless
steel)
4.0 (0.157)
4.0 (0.157)
5.0 (0.197)
17.0 (0.669)
A
Ø8.0 (0.315)
Ø5.0 (0.197)
Ø2.2 (0.087)
15.0 (0.59)
B
L
Note: 1. Distance A can withstand 150°C (302°F); Distance B can withstand 70°C (158°F);
2. L = 3ft. for E32-UTAT1-3F; 6ft. for E32-UTAT1-6F
91
E32
E32
J THROUGH-BEAM TYPE (CONT.)
E32-UTBT1-3F
E32-UTBT1-6F
Ø7.1 (0.281)
(5/16 - 24) thread
(303 stainless steel)
12.7 (0.5)
5.9 (0.234) (304 stainless steel)
(303 stainless steel)
Ø4.7 (0.187)
12.7 (0.5)
15.2 (0.6)
0.9 (0.035)
Ø3.2 (0.125)
(Fiber Bundle)
38.1 (1.5)
25.4 (1.0)
A
B
L
Note: 1. Distance A can withstand 200°C (392°F); Distance B can withstand 70°C (158°F);
2. L = 3ft. for E32-UTAT1-3F; 6ft. for E32-UTAT1-6F
Probe Type
E32-T33-1
Two, 0.25
(0.01) dia.
Sensing head
(SUS303)
0.8
3 (0.12) dia.
(0.03) dia.
15
15
Heat-shrinkable
tubing
Optical fiber,
two, 1 (0.04) dia.
25
(0.98)
10
12
35 (1.38)
2 m (6.56 ft.)
E32-TC200B
E32-TC200B4
1.0
(0.04) dia.
Stainless tube
1.2 dia. (SUS304)
max.
3.2
7
(0.28)
Two hexagon clamping nuts
Two toothed washers
Sensing head M4 x 0.7 (nickel-plated brass)
11
90 (3.5)
[40 (1.57)]
(see note)
2.4
Optical fiber, 2.2 (0.086) dia.
2 m (6.56 ft.)
Note: The values in the brackets are for the E32-TC200B4.
E32-TC200D
E32-TC200D4
Two hexagon clamping nuts
Two toothed washers
Stainless
1.0 dia. 1.2 tube
dia. (SUS304)
max.
3.2
7
2.4
11
90 (3.5)
[40 (1.57)]
See note
75
Sensing head M4 x
0.7 (nickel-plated
brass)
Optical fiber,
2.2 dia.
90
(3.53)
22
(0.87) dia.
2m (6.56ft.)
when straight
Note: The values in the brackets are for the E32-TC200D4.
92
400
(15.8)
Fiber attachment
(E39-F9)
E32
E32
J THROUGH-BEAM TYPE (CONT.)
E32-TC200F
E32-TC200F4
Two hexagon clamping nuts
0.5
(0.02) dia.
Stainless tube
(SUS304)
0.9 dia.
min.
2.5
(0.10)
Two toothed washers
Sensing head M3 x 0.5
(nickel-plated brass)
Optical fiber, 1 dia.
1.8
90
11
(3.5)
(0.43)
[40 (1.57)]
(See note)
5.5
(0.22)
Fiber attachment
(E39-F9)
25 (0.99)
10
2 m (6.56 ft.)
Note: The values in the brackets are for the E32-TC200F4.
Side Sensing Type
E32-T14
Lens unit
(PMMA)
4.4 dia.
Heat resistive ABS
8.2
7
(0.28)
Optical axis
R3.5
10.5
7
Optical fiber,
2.2 (0.086) dia.
Two, 3.2 dia.
8
10¦0.2
2.5
9.2
16
(0.63)
11.2
2m
(6.56 ft.)
E32-T14L
45°
Sensing head, 3 dia.
Heat-shrinking tubing
(stainless)
Optical fiber, 2.2 (0.086) dia.
2.8
3 (0.12) dia.
1.5
1
1.5
30 (1.18)
12
2 m (6.56 ft.)
35 (1.38)
Sensing surface
93
E32
E32
J THROUGH-BEAM TYPE (CONT.)
Side Sensing Type
E32-T16
20 (0.79)
4
3.2
10.2
Two, R2
0.5-mm (0.02) Wide Slit Seal
(Sold in Pairs)
6
(0.23)
Mounting Holes
4 2
(0.79)
0.5
20
4
Sensing
head
(ABS)
15.5
(0.61)
8.85
Two, (R)
1.2
Two, (R)
4.5
8.4
3
Two, M3
11
(0.43)
15
23
(0.90)
2.3
5.5
25
27
(1.06)
3.2
20
Lens
(2 x 10)
6 dia.
Black
1-mm (0.04) Wide Slit Seal
(Sold in Pairs)
6
1
58
4
43.2
Two,
3.2 (0.16) dia.
2m
(6.56 ft.)
23
(0.90)
15
Mounting bracket
E39-L4
Black
Fiber
2.2 (0.08) dia.
33 (1.30)
E32-T16P
E32-T16P + E39-L94 Mounting
Two, 3.2 dia.,
6 dia counter
sinking
14.5
(0.57)
0.5-mm (0.02) wide Seal Slit
(Two slits are provided)
4
(0.15)
3.4
(0.13)
10.7
2
0.5 (0.02)
19
(0.75)
27
(1.06)
13.4
20
(0.79)
4
35
(1.38)
20
(0.79)
4
4.8
Two, M3
Sensing
head
(2 x 11)
(PMMA)
4
26.4
(1.04)
Black
12.2
(0.48)
Sensing head
(heat-resistive ABS)
1-mm (0.04) wide Seal Slit
(Two slits are provided)
Sensing
head
3.4
(0.13)
2m
(6.56 ft.)
1
2.2 (0.09) dia.
optical fiber
52
(2.04)
20
(0.79)
3.2
(0.13)
19
(0.75)
4
43.2
(1.7)
13.4
26.4
(1.04)
Black
94
2.2-dia.
fiber
23.2
E39-L94 Mounting Bracket (0.91)
(sold separately)
E32
E32
J THROUGH-BEAM TYPE (CONT.)
Side Sensing Type
E32-T24
Fiber attachment
(E39-F9)
Sensing head 1 (0.04) dia.
SUS304 2 (0.07) dia.
Protective tube
1.4 dia.
Optical fiber, 1 dia.
45°
1
0.5
1.5
15
25 (0.99)
10
(0.39)
12
15 (0.59)
2 m (6.56 ft.)
35 (1.38)
High Temperature Type
E32-T51
Two hexagon clamping nuts
Two toothed washers
Sensing head M4 x 0.7 (nickel-plated brass)
1.5
(0.06) dia.
7
(0.28)
2.85 dia.
2.4
Optical fiber, 2.2 dia.
15
17
(0.67)
1
2 m (6.56 ft.)
Note: Resistant temperature is 150°C (302°F). Resistant temperature is 130°C (266°F) when used
continuously.
E32-T61
1.0
(0.04) dia.
7
(0.28)
Two hexagon clamping nuts
SUS flexible tube
Two toothed washers
Hexagon clamping screw
2.8 dia.
4 dia. 5 dia.
Sleeve
Sensing head M4 x 0.7
(SUS303)
M2.6 x 0.45
3
2.4
(See note)
4 dia.
10
20 (0.79)
5
2 m (6.56 ft.)
A
13 (0.51)
28 (1.10)
B
Note: Section A resists 300°C and section B (which is inserted to the amplifier) resists 110°C.
The operating temperature of section B must also be within the withstand temperature
range of the amplifier.
Special Purpose
E32-G14
Sensing head (ABS)
36.3 (1.43)
9.2
Lens
(PMMA)
22
(6.56 ft.)
25.2 (0.99)
20 (0.79)
R1.6
R1.6
Mounting Holes
Two, M3
R3.5
24 10
(0.95)
4
7.4
(0.29)
Optical axis
3.2 9.0 (0.35)
9.4
(0.37)
1.6
23.5 (0.92)
1.6
9.4
(0.37)
7.0
95
Optical fiber
2.2 (0.86) dia.
E32
E32
J THROUGH-BEAM TYPE (CONT.)
Special Purpose
E32-M21
Sensing head
M3 x 0.35
(SUS303)
Two hexagon clamping nuts
Two toothed washers
Silicone tube
Plastic fibers, four, 1 (0.04) dia.
Sleeve
13
28 (1.10)
1.8
2 m (6.56 ft.)
11
23 (0.90)
Note: One set of silicone tubes is black while the other set is gray for easy identification
when they are connected to the light source and receiver.
E32-T12F
4-mm
(0.16)
dia. lens Sensing head, 5 dia.
Fluoride resin
20
Optical fiber,
2.2 (0.086) dia.
4 dia.
100
(3.93)
2 m (6.56 ft.)
E32-T22S
Sensing head
(nickel-plated brass)
1.7 dia.
3
(0.12)
dia.
15
(0.59)
Optical fiber,
2.2 (0.086) dia.
2 m (6.56 ft.)
E32-T24S
1.8 (0.07)
0.4 (0.02)
Sensing head
(nickel-plated brass)
3.5 dia.
17.6
(0.69)
Optical fiber,
2.2 (0.086) dia.
11
(0.43) 3.2
3.2
3
Mounting bracket (attachment)
10
2 m (6.56 ft.)
20.5 (0.81)
2 (0.08) dia.
2
(0.08)
Sensing surface
96
E32
E32
J THROUGH-BEAM TYPE (CONT.)
Special Purpose
E32-T84S
A
14.2
(0.56)
R8
φ3
(0.12)
20
(0.79)
15
(0.59)
2.000
(78.74)
12
(0.47)
φ4
φ4
2.9 mm
SUS 304
90°
3.5
(0.14)
φ
φ
3
J DIFFUSE TYPE
General Purpose
E32-CC200
Sixteen, 0.25
(0.01) dia. for 1.0 dia. for light
lightreception emission
2.5 dia.
3
5.2
Two hexagon clamping nuts
Two toothed washers
Sensing head M6 x 0.75
(nickel-plated brass)
2.4
2 m (6.56 ft.)
23
(0.90)
10
Optical fiber,
two, 2.2 dia.
E32-D11
Sixteen,
0.265
dia.(0.01)
5.2
Sensing head Two hexagon clamping nuts
(SUS303)
Two toothed washers (10 teeth)
M6 X 0.75
Protective tube
10
(0.39)
2.4
15
17
(0.67)
E32-D11L
Optical fiber, two,
2.2 dia.
2 m (6.56 ft.)
Two hexagon clamping nuts
Two toothed washers
Two, 1.4 dia.
5.2
10
(0.39)
Sensing head (nickel-plated brass) M6 x 0.75
4 dia.
3
Two optical fiber,2.2 dia.
2.4
20
(0.79)
2 m (6.56 ft.)
97
φ5
B
13
(0.51)
2.2 mm dia.
E32
E32
J DIFFUSE TYPE (CONT.)
General Purpose
E32-D11R
2-151-0.075 dia.
Two, hexagon nuts
Two, toothed washers
6mm sensing head
4 dia.
2.2-dia. optical fiber
Note: The material is ADC (aluminum die-cast)
E32-D21
Sensing head
(nickel-plated
brass) M3 x 0.5
Four, 0.25
(0.01) dia.
2.5
Two hexagon clamping nuts
Two toothed washers
Protective tube
25 (0.98)
Optical fiber, two, 1 dia.
10
(0.39)
15
1.8
11
(0.43)
5.5
2 m (6.56 ft.)
E32-D21L
Two hexagon clamping nuts
Two toothed washers
Sensing head M4 x 0.75
(nickel-plated brass) Optical fiber,
two, 1.0 dia.
Two, 0.9
(0.04) dia.
3.2
25 (0.98)
10
(0.39)
2.4
3
7
(0.28)
Two fiber
attachments
(E39-F9)
15
(0.59)
2 m (6.56 ft.)
E32-D21R
Two, hexagon nuts
Two, E39-F9 Fiber Attachments
Two, toothed washers
3mm sensing 1mm optical fiber
head (See Note.)
2-151 x 0.037 dia.
Note: The sensing head is made of nickel-plated brass.
E32-D22L
Two fiber
attachments
(E39-F9)
Two,
0.9 dia.
2.7 dia.
Sensing head 3 dia.
(nickel-plated brass)
Optical fiber, two, 1 dia.
3
15
(0.59)
2 m (6.56 ft.)
98
25 (0.98)
10
(0.39)
Fiber attachment
(E39-F9)
E32
E32
J DIFFUSE TYPE (CONT.)
General Purpose
E32-D32
Light source
fiber 0.5 dia.
25 (0.98)
Sensing
head
SUS303
2 (0.08)
Heat-shrinkable
3 (0.12) tubing
dia.
dia.
15 (0.59)
Receive fiber
(0.25 dia.) x 4
2
Optical fibers,
two, 1 (0.04) dia.
Two fiber
attachments
(E39-F9)
10
(0.39)
12
2 m (6.56 ft.)
22 (0.87)
E32-D32L
Light source
(1 dia.)
15 (0.59)
Receive
(0.265 dia.) x 16
2 m (6.56 ft.) standard length
15 (0.59)
400 (15.75)
Sensing head,
3 dia (0.12).
(stainless)
Branching box,
6 dia. (heat-resistive
ABS black resin)
1,570 (61.81)
Optical
fibers, two,
2.2 (0.09) dia.
E32-DC50, E32-DC200,
E32-DC500, E32-DC1000
Two,
1.0 dia.
Part number
E32-DC50
E32-DC200
Two hexagon clamping nuts
Two toothed washers
Sensing head M6 x 0.75 (ADC)
4
(0.16) dia.
Optical fiber,2.2 dia.
3
4.8
E32-DC500
5 m (16.3 ft.)
E32-DC1000
10 m (32.8 ft.)
2.4
17
(0.67)
10
(0.39)
L
50 cm (19 in)
2 m (6.56 ft.)
L
E32-DC200C
150
(5.90)
Two hexagon clamping nuts
Two toothed washers
Sensing head (nickel-plated
brass) M6 x 0.75
Two, 1.0 dia.
22 dia.
(0.87)
5.2
Optical fiber, 2.2
x 2 dia.
2.4
10
(0.39)
17 (0.67)
2 m (6.56 ft.)
when straight
90 (3.54)
E32-DC200E
Two hexagon clamping nuts
Two toothed washers
Sensing head M3 x 0.5 (SUS304)
Two, 0.5 dia.
2.5
(0.10)
Optical fiber, two, 1 dia.
1.8
5.5
(0.22)
11
(0.43)
2 m (6.56 ft.)
99
Two fiber
attachments
(E39-F9)
25 (0.98)
10
(0.39)
400 (15.8)
E32
E32
J DIFFUSE TYPE (CONT.)
Armored Type
E32-UDAT1-3F
E32-UDAT1-6F
(ABS)
(5/16 - 24) thread
(303 stainless steel)
12.7 (0.5)
5.1 (0.2)
(304 stainless steel)
Ø8.0 (0.315)
Ø5.0 (0.197)
Ø2.2 (0.087)
(Epoxy-filled PVC)
Ø1.7 (0.066)
(Fiber Bundle)
38.1 (1.5)
(303 stainless steel)
4.0 (0.157)
4.0 (0.157)
5.0 (0.197)
17.0 (0.669)
38.1 (1.5)
15.0 (0.59)
190.5 (7.5)
50.8 (2.0)
A
B
L
Note: 1. Distance A can withstand 150°C (302°F); Distance B can withstand 70°C (158°F); L= 3ft. or 6ft.
2. L = 3ft. for E32-UDAT1-3F; 6ft. for E32-UDAT1-6F
E32--UDBT1--3F
E32--UDBT1--6F
(5/16 - 24) thread
(303 stainless steel)
12.7 (0.5)
5.9 (0.234)
(304 stainless
steel)
(303 stainless
steel)
(PVC)
Ø7.1 (0.281)
Ø4.7 (0.187)
12.7 (0.5)
15.2 (0.6)
0.9 (0.035)
25.4 (1.0)
Ø3.2 (0.125)
(Fiber Bundle)
38.1 (1.5)
152.4 (6.0)
38.1 (1.5)
A
B
L
Note: 1. Distance A can withstand 200°C (392°F); Distance B can withstand 70°C (158°F)
2. L = 3ft. for E32-UDBT1-3F; 6ft. for E32-UDBT1-6F
Probe Type
E32-D33
Two, 0.25
(0.01) dia.
0.8
(0.03)
dia.
Sensing head
(SUS303) 3 (0.12)
dia.
15 (0.59)
Heat-shrinkable
tubing
Optical fiber, two,
1 (0.04) dia.
12 (0.47)
15 (0.59)
35 (1.38)
2 m (6.56 ft.)
E32-DC200B
E32-DC200B4
Two, 1.0 dia.
5.2
10
(0.39)
Two hexagon clamping nuts
Two toothed washers
Sensing head M6 x 0.75 (fine screw)
Stainless
tube
2.5 dia. (SUS304)
max.
2.4
90 (3.54)
[40 (1.57)]
See note
17
(0.67)
Optical fiber,2.2 dia.
2 m (6.56 ft.)
Note: The values in the brackets are for the E32-DC200B4.
100
10
(0.39)
25
(0.98)
Fiber attachment
(E39-F9)
E32
E32
J DIFFUSE TYPE (CONT.)
Probe Type
E32-DC200D
E32-DC200D4
Two, 1.0
(0.04) dia.
Two hexagon clamping nuts
Two toothed washers
Sensing head M6
x 0.75 (SUS304)
Stainless
tube
2.5 dia. (SUS304)
max.
150 (5.90)
22 dia.
(0.87)
Optical fiber,
two, 2.2 dia.
90
(3.54)
2.4
5.2
10
(0.39)
17
(0.67)
90 (3.54)
[40 (1.57)]
See note
Note:
400
(15.8)
2 m (6.56 ft.)
when straight
The values in the brackets are for the E32-DC200D4.
E32-DC200F
E32-DC200F4
Two, 0.5
(0.02) dia.
Stainless tube
(SUS304)
1.2 dia. min.
2.5
Two hexagon clamping nuts
Two toothed washers
Sensing head M3 x 0.5
(SUS304)
Optical fiber, two, 1 dia.
Fiber
attachment
(E39-F9)
25 (0.98)
10
(0.39)
1.8
90 (3.5)
[40 (1.57)]
See note.
5.5
(0.22)
Note:
2 m (6.56 ft.)
11
(0.43)
The values in the brackets are for the E32-TC200F4.
E32-DC9G
E32-DC9G4
1.2 (0.05)
dia. max.
Sleeve
4 (0.16)
Stainless tube
8
Do not bend the stainless
tube in this range.
10
(0.39)
Note:
7.5
90 (3.54)
[40 (1.57)]
See note
17
(0.67)
6
(0.24)
13
(0.51)
The values in the brackets are for the E32-DC9G4.
Side Sensing Type
E32-D14L
Sensing head
(stainless)
45°
Optical fiber,
two, 2.2
(0.09) dia.
Heat-shrinkable tubing
5.7
6 (0.24)
dia.
1.5
1
2
30 (1.18)
Light baffle
35 (1.38)
12 (0.47)
2 m (6.56 ft.)
Sensing surface
101
15 (0.59)
E32
E32
J DIFFUSE TYPE (CONT.)
Side Sensing Type
E32-D24
Sensing
head
3 (0.12) Heat-shrinkable
(SUS304)
tubing
2 (0.08) dia.
dia.
45°
1
0.5
1.5
15 (0.59)
Light baffle
12
(0.47)
15 (0.59)
35 (1.38)
25 (0.98)
10
(0.39)
Optical fibers, two,
1 (0.04) dia.
Two fiber
attachments
(E39-F9)
2 m (6.56 ft.)
Sensing surface
High Temperature Type
E32-D51
Two hexagon clamping nuts
Two toothed washers
Sensing head,M6 x 0.75*
Two, 1.5 dia.
Optical fiber, 2.2
(0.09) dia.
4.9
3.1
10
(0.39)
3
2.4
13 (0.51)
17
(0.67)
2 m (6.56 ft.)
*nickel-plated brass
Note:
Resistant temperature is 150°C (302°F). Resistant temperature is 130°C (266°F) when used
continuously.
E32-D61
Two hexagon clamping nuts
Two toothed washers
1.4
(0.06) dia.
M4 x 0.7
Sensing head (SUS303)
M3 x 0.75
5 dia.
3.5 dia.
SUS flexible tube
SUS304
Sleeve
Hexagon clamping screw
8
10
(0.39)
Note:
3
2
2.4
20 (0.79)
5
3
2 m (6.56 ft.)
5
6.5
B
A
See note
13
16.5 (0.65)
6.4
(0.25)
Section A resists 300°C (572°F) and section B (which is inserted to the amplifier) resists 110°C (230°F).
The operating temperature of section B must also be within the withstand temperature range of the
amplifier.
102
15 (0.59)
E32
E32
J DIFFUSE TYPE (CONT.)
High Temperature Type
E32-D73
Two hexagon clamping nuts
Two toothed washers
SUS flexible tube
M4 x 0.7 (SUS303)
4 dia.
2.8 dia.
Sensing head
1.25 dia.
2.5 dia.
1.65 dia.
1.0
(0.04) dia.
SUS303
Hexagon
clamping
screw
Sleeve
5 dia.
8
7
5
5
2.4
5
10
20 (0.79)
60 (2.36)
A
Note:
2 m (6.56 ft.)
B
See note
6.5
16.5 (0.65)
13 (0.51)
15 (0.59)
6.4
(0.25)
C
Section A resists 400°C (752°F), section B resists 300°C (572°F) and section C (which is inserted to the amplifier)
resists 110°C (230°F). The operating temperature of section C mustalso be within the withstand temperature range
of the amplifier.
Convergent Type and Special Purpose
E32-D12F
Sensing head,
6 (0.24) dia.
Fluoride resin
16
5 (0.20) dia.
2 m (6.56 ft.)
Optical fiber, two,
2.2 (0.09) dia.
100
(3.94)
E32-L24L
4 (0.16)
3.3
3.3
20
(0.79)
3.6 (0.14)
1.5
Optical
axis
18 (0.71)
Side view prism (PC)
Two fiber attachment
(E39-F9)
4
25
(0.98)
6
Two, 1 dia. optical fibers
6.5 (0.26)
Sensing head
(PC)
Two, 3.2 dia, 6 dia.
counter sinking
2m (6.56 ft.)
103
10
(0.39)
E32
E32
J DIFFUSE TYPE (CONT.)
Convergent Type
E32-L25
20 (0.79)
5
10
(0.39)
Note:
4.8
6.5
20
(0.79)
4
White line
6.5 (0.26)
Sensing head (ABS)
The fiber for the light source is
identified by a white line.
Optical fiber, two, 2.2 dia.
2 m (6.56 ft.)
Two, 3.2 dia.,
6 dia. spot facing
E32-L25A
5
20 (0.79)
4
10
4.8
6.5
(0.26)
6.5
(0.26)
20
(0.79)
Sensing head
(ABS)
Two, 3.2 dia.,
6 dia. spot facing
2m
(6.56 ft.)
White line
Optical fiber, two,
2.2 dia.
E32-L25L
Two fiber attachment
(E39-F9)
18 (0.71)
4
25
(0.98)
6 (0.24)
16
(0.63)
Two, 1 dia. optical fibers
6.5 (0.26)
Sensing head
(PC)
Two, 3.2 dia, 6 dia.
counter sinking
2m (6.56 ft.)
104
10
(0.39)
E32
E32
J RETROREFLECTIVE TYPE
E32-R16
Nameplate
15
(0.59)
27 (1.06)
7 (0.28)
13
(0.51)
10
(0.39)
3.2
(0.13)
7.2
6
15.2
(0.60)
1.5
16
1.5 (0.06)
3.2
4
8
21.5
(0.85)
Optical fiber,
two, 2.2 (0.09) dia.
Standard length: 2 m
Two, M3 screws
(attachment)
21
(0.83)
Lens (PMMA)
17
1 (0.67)
22.5
(0.88)
16±0.2
Mounting bracket
(attachment)
E32-R21
Lens
(PMMA)
Sensing head
Two hexagon clamping nuts
Two washers
Silicone tube
M6 x 0.75
Optical fibers, two, 1 dia.
Two fiber
attachments
(E39-F9)
25 (0.98)
10
5 dia.
2.2
(0.09)
10
(0.39)
3
2.8
(0.11)
11
17.8
14
2 m (6.56 ft.)
27.8
(1.09)
105
E32
E32
Installation
J SENSING HEAD
J CUTTING FIBER
Mounting Sensing Head in a Panel
Insert a fiber into the Fiber and determine the length of the fiber
to be cut.
Prepare a hole in the panel that can accommodate the threaded
cylindrical sensing head. Be sure to place the washer in front of
the mounting nut before inserting the sensing head through the
hole. Tighten the front mounting nut using no more than the
maximum torque recommended in the table.
Press down the Fiber Cutter in a single stroke to cut the fiber.
When the fiber is cut, an insertion mark is inscribed on the fiber.
For a 2.2-mm dia. standard fiber only.
Spring mounting clip
Toothed washers
12.6
Insertion mark
2.2-dia.
Insert a fiber into the Fiber Cutter in the direction indicated by the
arrow (refer to the following figure).
Nuts
(attachment)
Mounting Sensing Head in a Channel
2
Insert the sensing head at the desired location in the channel as
shown in the illustration, then use a set screw to fasten the head
in place. Apply no more than 2.6 in-lb of force in tightening the
set screw.
Retaining screw
(M 3 max.)
1
The cutting holes cannot be used twice. If the same hole is used
twice, the cutting face of the fiber will be rough and the sensing
distance will be reduced. Always use an unused hole.
Use either one of the two holes on the right (refer to the following
figure) to cut a thin fiber as follows:
1. An attachment is temporarily fitted to a thin fiber before
shipment.
Tightening Torque
Use a proper-sized
wrench and do not
exceed the torque
recommended for the
sensing head.
Temporarily fitted
Sensing heads
Maximum torque
M3 and M4 threads
M6 threads
6.88 in-lb
8.66 in-lb
2 mm dia., no thread
3 mm dia., no thread
2.6 in-lb
2.6 in-lb
E32-D14L
E32-T12F
8.66 in-lb
6.88 in-lb
E32-D12F
E32-T16
6.88 in-lb
4.33 in-lb
E32-R21
E32-M21
E32-L25A
5.2 in-lb
4.33 in-lb
6.88 in-lb
2. Secure the attachment after adjusting the position of it in the
direction indicated by the arrow.
3. Insert the fiber into the E39-F4 to cut.
Cutter E39-F4
Two holes for
thin fiber
Three holes for
standard fiber
(2.2 mm dia.)
Note: Insert the fiber in the direction indicated by the arrow.
106
E32
E32
J FIBER UNITS WITH 90° BEND IN
J BENDING RADIUS
STAINLESS STEEL PROBE
E39-F11 Sleeve Bender
The bending radius of the stainless probe should be as large as
possible. The smaller the bending radius becomes, the shorter
the sensing distance will be.
Applicable Models
E32-TC200B/TC200F/DC200F
Appearance
Insert the tip of the stainless probe to the Sleeve Bender and
bend the stainless probe slowly along the curve of the Sleeve
Bender (refer to the figure).
Stainless Steel Probe with a 90° Bend at the Tip
Length
ℓ1
1.2 dia.
1.2 dia.
1.3 dia. max.
max.
min.
R
R 10
R 12.5
R5
R 7.5
Bending radius
ℓ1 (+1)
R 5.0
10.0 mm
15.0 mm
R 7.5
12.5 mm
17.5 mm
R 10.0
15.0 mm
20.0 mm
R 12.5
17.5 mm
22.5 mm
Fiber tip position mark
Stainlessprobe
The length overall is 120 mm max.
Note: If larger ℓ1 is required, use the E39-F11 Sleeve Bender.
Stainless Steel Probe with a 90° Bend at the Base
Length
ℓ2
90o max.
10
R
10
Do not bend here.
Bending radius
ℓ1 (+1)
R 5.0
5.0 mm
10.0 mm
R 7.5
7.5 mm
17.5 mm
R 10.0
10.0 mm
20.0 mm
R 12.5
12.5 mm
22.5 mm
The length overall is 120 mm max.
Note: If larger ℓ2 is required, use the E39-F11 Sleeve Bender.
Sensing Distance for Probes with 90° Bends
Part number
Amplifier
Standard
R5.0
R7.5
R10.0
R12.5
E32
TC200B
E32-TC200B
E3X-H11
E3X-Ajj
400 mm
180 mm
260 mm
110 mm
330 mm
140 mm
360 mm
160 mm
400 mm
180 mm
E32-TC200F
E32
TC200F
E3X-H11
100 mm
55 mm
100 mm
100 mm
100 mm
E3X-Ajj
50 mm
30 mm
50 mm
50 mm
50 mm
E3X-H11
36 mm
30 mm
36 mm
36 mm
36 mm
E3X-Ajj
18 mm
10 mm
18 mm
18 mm
18 mm
E32-DC200F
E32
DC200F
Bending radius
107
E32
E32
Proper Supports for Cables
J INSTALLING FIBER CABLES
To support the fiber cable between the sensing site and the
amplifier, mount the cable using a nylon strap or cable tie. Do not
use a U-shaped strap that will compress or put stress on the fiber
cable. To prevent damage from excessive vibration, take up the
fiber in a loop as shown below.
Bends in Fiber cables
Plastic and glass filament fiber cables may be bent to avoid
obstacles on the way to the sensing site. Here are some
guidelines about the location of cable bends: The first bend must
be as least 20 mm (0.79 in) away from where the cables enter
the amplifier. The last bend must be at least 20 mm (0.79 in)
bending the sensing head. We recommend a 25 mm (1.0 in)
minimum radius for a right angle bend to maintain the rated
sensing distance. The sharpest allowable right angle bend is over
a 10 mm (0.39 in) radius, but this will result in a shorter sensing
distance. Refer to the bending radius graph.
Fiber unit
Nylon wireholder
Correct
Metal holder
Incorrect
40 mm max.
The Fiber Head could be broken by excessive vibration. To
prevent this, the following is effective:
Correct
Amplifier
Fiber unit
A one-turn loop can
absorb vibrations.
20 mm max.
Incorrect
Tape
J LONGER FIBER-OPTIC CABLES
Do not apply excess force on the Fiber Units.
Applicable Models
E32-TC200/-DC200
E32-TC200B/-DC200B
E32-TC200E/-DC200E
E32-TC200F/-DC200F
E32-TC200A
Do not pull or press the Fiber Units. The Fiber Units have a
withstand force of 1 kg or 3 kg (pay utmost attention because the
fibers are thin).
Do not bend the Fiber Units beyond the permissible bending
radius.
Appearance
Do not bend the edge of the Fiber Units.
ℓ
Rate of variation (%)
E3S1-- X3 amplifier with
E32-DC200 diffuse
reflective fiber cable
The length can be ordered in increments of 1 m between
6 m min. and 20 m max. (2-m and 5-m fiber length types are
standard for E32-TC200, E32-DC200.)
Bending
radius
E39-F10 Fiber Connector
Use the following procedure (refer to the figure) to connect fibers
via the Fiber Connector.
Splice
Retention Unit
Retention Unit
(0.197) (0.394) (0.591) (0.787) (0.984) (1.181)
Bending radius [mm (inch)]
Each fiber should be as close as possible before they are
connected.
Sensing distance will be reduced by approximately 25% when
fibers are connected.
Only fibers with 2.2 mm dia. can be connected.
108
E32
E32
E32-T16 Slit Seal (Attachment)
J SPECIAL HANDLING
E32-D51/-T51 Heat-Resistant Fiber
The bending radius of the fibers should be 35 mm min.
Connecting fibers via the E39-F10 Fiber Connector is not
possible.
The withstand temperature of the Heat-Resistant Fibers is 150°C
max. In continuous operation, the ambient temperature should be
130°C max.
Peel the E32-T16 Slit Seal off the ground paper and affix the Slit
Seal to the sensing face of the sensor so that the corners of the
Slit Seal fit in with the corners of the sensing face. To sense an
object at a distance of 30 cm max., a 0.5-mm wide Slit Seal must
be used.
E32-T16 Sensing Head
E32-T14/-T51
If the sensor is ON because some object in front of the lenses
reflects light, attach the black seals (sold together) to the lenses.
Attachment slit
E32-T14/-G14
Seal
E32-L25 (A) Wafer Sensor
Insert the fiber with a white line into the light projection side of the
Amplifier.
The tightening force of the sensor head is 8 kgf S cm (0.75 N S m).
Avoid places where water could be sprayed onto the E32-L25(A).
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
OMRON ELECTRONICS LLC
OMRON ON--LINE
OMRON CANADA, INC.
1-800-55-OMRON
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci
416-286-6465
One East Commerce Drive
Schaumburg, IL 60173
Cat. No. CEDSAX4
11/01
Specifications subject to change without notice.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
Printed in U.S.A.
